开云体育

It is a good point to raise. Max Message Number defines the point at which Housekeeping renumbers messages, starting from 1. It is not actually a hard limit, and the BBS won't crash. However it could

A normal UZ7HO port definition is PORT ?ID=UZ7HO ?DRIVER=UZ7HO ?CHANNEL=A ?INTERLOCK=4 ?PACLEN=100 ?CONFIG ? ADDR 127.0.0.1 8000 ? MAXSESSIONS=5 ? UPDATEMAP ENDPORT How are you running UZ7HO

Mike, WX7RNO and WA6MTY are both BPQ systems, I manage both of them.? WX7RNO is a radio only station with no direct internet connection, but it has an excellent antenna location and altitude

UZ7HO. But I'm not sold only to that as it is the only one I used.... Brett

I'm not at home right now so I can't access my configuration, but the other thing needed to make it work right is to set the delay pot as low as possible. If the delay is up to high you will transmit

Which modem are you trying to use with the Signallink? 73, John

I have, but I took my station down recently due to moving QTH, and am not sure when it will be back online. In other words: I don’t have the config handy to share. At a high level however, the

Hi Mark Sorry about the misunderstanding, I am not sure what will happen in that case, seems to me I had similar setting Max messages lower then number of day before renumbering I think Mail Server

Group, is anyone using a Signal Link USB with a PILINBPQ setup? I have tried some pre-made port configs, non seemed to work. Thanks for the help.. Brett KB5YZB

Mike, we misunderstand each other.? The original post shows the following: Bulletins keep for 365 days? (that is > 12000 messages) Max Message Number 10,000 How can he expect to keep 12,000 messages

Don Is it only WX7RNO you are having connection problems with? I am a bit unclear if WX7RNO is also BPQ Node/BBS? If you are not also the sysop for WX7RNO, in other words knowing if WX7RNO is BPQ or

John, I tested both connecting right at the termination of a WX7RNO initiated connection and also concurrently with a WX7RNO initiated connection.? Neither worked to connect to WX7RNO. I used both my

Many, many thanks for your efforts! Perry Sent: Saturday, June 4, 2022 2:33 AM To: [email protected] Subject: Re: [bpq32] Address syntax for multiple recipents. It should do, yes. 73, John

I just tested it again on my QT Term and it did work. In fact the system added the full address from my WP files. Perry, you should get your copy of the message I made up the next time you connect to

It should do, yes. 73, John

John, I will try that. It seems to make sense as there is a short period of functionality after a computer reboot. It lasts a few minutes. ? But as I recall ?some of the automated connections may be

And how about if he uses fully qualified addresses, i.e., "sp abc4bb@...;def4aa@..." Will that still work? Perry

Would a space character between the semicolon and the second address upset the apple cart? If so, that may be why it didn't work for him. I'll get him to try again with your syntax. Perry

That is at least a possibility. I can't think of any other way that either the OS or BPQ could differentiate between an incoming connect and a reply to an outgoing connect. If the serial port was shut

Perry, Yes, you can use ; as an address separator, eg SP G8BPQ;GM8BPQ The same format also works in WebMail. 73, John ________________________________________ Sent: 04 June 2022 01:54 To: