I can connect to some BBS with Pactor, but I have a new neighbor that it is not
playing well with. The strange thing is that I can connect just fine
to him with Winl2K. I have set the FSK and PSK levels to match what I
have figured out in WL2k, but still no joy. I get one
green decode light, then it is all red from there out. He is plenty
strong here, and that is why WL2k connects right away. I can connect
with the same settings using my TS-590s, but not my FT-710. With WL2k
this radio works fine to connect to him. Any more parameters that I
should be aware of?
Here is my port config:
PORT
ID=Pactor Link
COMPORT=7; COM Port Address
SPEED=57600; COM Port Speed
DRIVER=SCSPactor
INTERLOCK=1; ; Optional - set if you have two portssharing
the same radio.
; Set the same Interlock value on both ports.
CONFIG ; Driver-Specific Configuration
APPL RMS ; Autoconnect to BPQ32 RMS Application
; RIGCONTROL
; COM2 19200 ICOM IC700 70
; 4,14.103,USB,F1,P123
; 4,14.112,USB,F1,P123
; ****
PSKA 90 ; PSK TX Output level.
FSKA 90 ; TX Level for FSK modes.
# If you wish to use any packet ports, you will need to set suitable
ax.25 param, for example:
PACKETCHANNELS 10 ; Enable Packet Ports
PAC TXD 1:250
PAC TXD 2:200
# if you are using a Dragon, uncomment the following
ENDPORT
--
Thanks,
Chris Maness
