Re: Forwarding Script and Frequency change on VARA port
|
What commands are available that I can send to a VARA port?
I see BWXXXX is accepted but that about a freq change or anything else
or does that need to be done outside of the vara connection
?
While I am scanning through BPQ Rigcontol that is fine but
I need to be able to do a forwarding and choose the frequency?
based on the time of day when I know propagation would be ?better
on a know set of frequencies
?
would like to use either a memory channel on a 7300?
or be able to change the frequency and set the radio to USB-D ?(Data mode)
?
THanks in advance
?
?
Rob
Hello Rob,
You should be able to first attach to the VARA port, then set the frequency in the connect script. You can also precede the commands below with a time range.
e.g. ATT 4 RADIO 14.1065 USB-D BW500
The caveat is that I don't have a 7300, so I'm not sure if that's the exact command for it. There are plenty of others on here that have 7300's, though, so they can clarify if needed.
73, Lee K5DAT _._,_._,_
|
