Mark thanks for the input.
?
On this:
?
I hesitate to even get into this but if this were mine I would try the following...
?
Port 2 & 4 comment out these lines:
UNPROTO=APBPQ1,WIDE1-1,WIDE2-1
?BCALL=NP4JN-11
?
I have a Yaesu FTM-400 / FT3D on my jeep and I noticed that the radios would not decode packets? from my digi, when I added this section both of them started recognizing the packets and decoding them as my own packets.
?
On the Digimap your change would bridge packets between frequencies trying to avoid doing that operation.
?
On this will test top 4 lines to see what effects have:
?
Comment out the following lines:
TRACECALLS=WIDE,TRACE?
?DIGICALLS=WIDE1-1,WIDE2-1
GATEDPATH 4=WIDE1-1,WIDE2-1;
?GATEDPATH 2=WIDE1-1;
?ReplaceDigiCalls? ?(If I remove this when looking at statistics on arps.fi it would not show who was the digipeater that repeated the packet before sending to IS)
?
Will let you know of results.
?
Heber NP4JN
73
