¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Bpq32
  2. Messages
Single Messages Topics Expanded

Re: QtSoundModem on a separate host: changing radios

 

¿ªÔÆÌåÓý

Hi Chuck,

Qtsoundmodem running on different machine. 44.137.31.76

QtSoundModem.ini

[Init]
CM108Addr=
DispMode=1
DualChan=1
DualPTT=1
FLRigHost=127.0.0.1
FLRigPort=12345
HamLibHost=44.137.31.76
HamLibPort=4532
MinimizetoTray=0
PTT=HAMLIB
PTTBAUD=19200
PTTMode=17
PTTOffString=
PTTOnString=
RXSampleRate=12000
SCO=1
SndRXDeviceName="hw:1,0 USB Audio(USB Audio CODEC)"
SndTXDeviceName="hw:1,0 USB Audio(USB Audio CODEC)"
SoundMode=0
TXPort=8884
TXRotate=0
TXSampleRate=12000
UDPClientPort=8888
UDPHost=127.0.0.1\n
UDPServer=0
UDPServerPort=8884
WaterfallMax=3300
WaterfallMin=0
Wisdom=(fftw-3.3.8 fftwf_wisdom #x4a633eef #xb5a95564 #x91014bdd #x9c85ce5f\n? (fftwf_codelet_n1fv_3_neon 0 #x30bff #x30bff #x0 #xd8eb4fc2 #xb4b7ddcb #xc648e13b #x97a64eef)\n? (fftwf_dft_vrank_geq1_register 0 #x30bff #x30bff #x0 #x86ba2fc3 #xd9d37881 #xffbbb400 #x20032685)\n? (fftwf_dft_vrank_geq1_register 0 #x30bff #x30bff #x0 #xb1615290 #x725e2d62 #xa4c41a4d #x764c835f)\n? (fftwf_codelet_t1fuv_6_neon 0 #x30bff #x30bff #x0 #xa1dae1f9 #xcf4175ca #x165c93d4 #x431b4b4f)\n? (fftwf_dft_vrank_geq1_register 0 #x31bff #x31bff #x0 #x51999523 #x06be4b5b #xc7d1dd51 #x53b6199d)\n? (fftwf_rdft_rank0_register 2 #x31bff #x31bff #x0 #xff75c762 #x3a0ee093 #x5b78d592 #x6b6be60e)\n? (fftwf_codelet_t1fv_3_neon 0 #x30bff #x30bff #x0 #xf6ecde88 #x78652c9c #xfb4aeade #xb66f7fb6)\n? (fftwf_codelet_t3fv_16_neon 0 #x31bff #x31bff #x0 #x466cbe30 #x384c6da7 #x95d87b8c #xe3cecc25)\n? (fftwf_dft_r2hc_register 0 #x31bff #x31bff #x0 #xe57fac2b #x1a805e91 #x77bebbbf #xc7df4f55)\n? (TIMEOUT 0 #x1040 #x11bdd #x11c #xd124ca6c #xeb82cd90 #x28cd6189 #x0412976b)\n? (fftwf_dft_bluestein_register 0 #x31bff #x31bff #x0 #x95391a46 #xf3b5f154 #x7e4c9611 #x9c236d23)\n? (fftwf_dft_nop_register 0 #x31bff #x31bff #x0 #xdf288e01 #x21687a96 #xf5aa97df #x2b6cb1e3)\n? (fftwf_dft_buffered_register 1 #x31bff #x31bff #x0 #x48f7cedd #x5ddc4b78 #xe6834056 #xf22ff7fa)\n)\n
darkTheme=false
multiCore=1
onlyMixSnoop=false
pttGPIOPin=17
pttGPIOPinR=17
txLatency=50
useKISSControls=false

Use hamlib for TX (also on the qtsoundmodem machine, there is where your ic7300 is connected)

/usr/local/bin/rigctld -m 3073 -r /dev/ttyUSB0 -s 19200 -T 44.137.31.76 -t 4532

On my BPQ32 machine

bqp32.cfg

; My Radio Number 1 that automatically switches bands and updates frequency every 5 seconds
RADIO 1
HAMLIB 44.137.31.76:4532
00:00
5,14.102300,USB,F1,D,P123
06:00
5,7.049450,USB,F1,D,P123
19:00
5,14.102300,USB,F1,D,P123
****

Running QtSoundModem and bpq32 on the same machine

HamLibHost=44.137.31.70
HamLibPort=4532
PTT=HAMLIB
SndRXDeviceName="hw:1,0 USB Audio(USB Audio CODEC)"
SndTXDeviceName="hw:1,0 USB Audio(USB Audio CODEC)"

bpq32.cfg

; My Radio Number 1 that automatically switches bands and updates frequency every 5 seconds
RADIO 1
/dev/ttyUSB0 19200 ICOM IC7300 94 PTT_SETS_INPUT AUX HAMLIB=4532
00:00
5,14.102300,USB,F1,D,P123
06:00
5,7.049450,USB,F1,D,P123
19:00
5,14.102300,USB,F1,D,P123
****

The above works well for me.

73 Niels PD9Q

Op 21-1-2025 om 17:00 schreef Chuck Gelm:

My IC-7100 stopped transmitting power.
I want to use my IC-7300 in its place.
I have been running pilinbpq (on a rpi;-) since December 2020 and
QtSoundModem64 on a tiny x86 laptop for about 2 years.
I am no longer familiar with how to select my radio's serial port; /dev/ttyUSB73 .

'aplay -l/arecord -l' reports my IC-7300 on "Card 2" ("hw:2,0" ?).
My IC-7100 was "Card 1" ("hw:1,0 ?)

I cannot find a reference to "/dev/ttyUSB" nor "hw:#,0" in QtSoundModem.ini.

I found a previous reference to "hw:1,0" in
(GUI) QtSoundModem64 -> Settings -> Setup Devices -> Dialog -> Sound Card.
I changed that to 'hw:2,0'.

BPQ did set my IC-7300 to 7.101 MHz, so maybe something is working.

My IC-7100 uses CI-V address 88h, my IC-7300 uses CI-V address 94h.
Where to I edit this setting?

73, Chuck









Join [email protected] to automatically receive all group messages.