Good point. I use the UZ7HO driver on the ax25 port. I will try to use KISS but I am afraid of losing the INTERLOCK function with KISS.?
Em s¨¢b., 12 de out. de 2024, 10:40, Lee Bengston via <kilo5dat=
[email protected]> escreveu:
My guess is that you are using the UZ7HO driver in BPQ.? My observation is that the ID is sent only to KISS ports (and perhaps AXIP/UDP - not sure about those).? If you change to use KISS to communicate with SoundModem, I think you will see the ID sent on that port.
73,
Lee K5DAT
On Sat, Oct 12, 2024 at 8:07?AM Mauro Veiga via <maurorveiga=
[email protected]> wrote:
Hello Mark. The radio transmitts fine all beacons and messages sent to UZ7HO soundmodem. Only IDMSG is not sent to soundmodem. Only Loopback port send IDMSG.?
Think than i need any command to send IDMSG to another port instead of Port 1.
Em s¨¢b., 12 de out. de 2024, 09:48, Mark Taylor via <mtaylor=
[email protected]> escreveu:
Let's see...
?
UNPROTO controls the path of the BTEXT message, but as long as you have a value for IDMSG the only reason I can think of is that you radio squelch setting is not allowing BPQ to sense a clear channel to transmit.
?
Turn the radio off for a while and see if the port starts showing that it is transmitting.? If using windows you can set the monitor windows to show your own transmissions. On linux you may have to open a window and connect to your node to monitor the port.
?
?
?
Mauro Veiga