John,
I'm sure it's a trivial matter but that doesn't quite gel with what I'm observing. The only RPR station in this list is W7BMH but I see dots next to K7SKI and KB9KC (both HFP stations).
Could it be some glitch with the switchmodes statement? I.e. the mode gets switched to robust packet just as the call is added to the heard list perhaps?
HAVEN:K7TMG-7} Heard List for Port 2
K7TMG. 00:00:00:13
W7BMH-1+ 00:00:06:24
W7BMH-1. 00:00:06:24
WH6ANH-7 00:00:09:14
KE0GB-7 00:00:16:14
KB5YZB-1 00:00:30:00
KB9SOZ 00:00:31:08
N0HI-7 00:00:44:05
VE3DTJ 00:00:53:45
KB9PVH-7 00:01:11:27
KB5YZB-7 00:01:11:59
AL7LS 00:01:19:05
WG0A-1 00:01:47:34
AC0VC-7 00:01:50:51
KB8UVN-7 00:01:50:54
N0NJY-7 00:01:58:50
AB4KR 00:02:20:40
W9GM-1 00:02:20:58
WB5BNV 00:02:41:54
N5LCP 00:02:57:28
K7SKI 00:02:58:42
N3MEL 00:03:02:46 via KB9PVH*
N3MEL-7 00:03:15:44
KB9KC. 00:03:23:23
WH6ANH-15 00:03:27:01
K7SKI. 00:03:28:42
KK4DIV-7 00:03:32:35
I'm using DRIVER=SCSTracker and SWITCHMODES 8 on that port.
PS Don't waste your valuable time on this, I was just curious is all.
Sholto
toggle quoted message
Show quoted text
On 7/6/2022 1:22 PM, John G8BPQ wrote:
In non-ax.25 drivers (but including UZ7HO) + is connected and ! is heard. For ax.25 . indicates robust packet, no character normal packet.
73,
John
On 06/07/2022 14:49, Jeff - WA4ZKO wrote:
On some HF drivers the dot behind the callsign equals that call was heard.
The +? equals a connection was made.
That is expected behavior. I know the Robust Packet hostmode Tracker DSP TNC driver does it, so probably the same for the Pactor drivers.
John can elaborate/correct me.
I've tried you the other afternoon on 20m RP, but no joy. Tad too close for 20m this time of year, but should be easy(ier) this Fall/Winter.
73
Jeff
WA4ZKO
