Not only that Lee, I have used mine on 9600 baud
packet for 20 years and it works just fine.? The KPC 9612 has a
significant buffer and never has a problem.
Jay WS7I
On 7/5/2022 5:52 PM, Lee Bengston
wrote:
toggle quoted message
Show quoted text
Mike,
If it's being used only for 1200b packet, which
is what I thought the context was here, then a speed of 9600
works fine.
Thanks,
Lee K5DAT?
On Tue, Jul 5, 2022, 8:36
PM Mike Melnik <
N9PMO@...>
wrote:
Lee
?
Kantronics
9612 (Dual Port) Hi speed TNC¡¯S need to be run at
a Com Port speed of 19200 or faster
remember
you need to communicate with the TNC faster then
the over the air speed is, 9600 Baud
would
be slow for the Dual Port TNC.
?
SPEED=19200
?
This
is the MODE Command out of Kiss mode must be set
in both bpq32.cfg & the TNC
with
a Comport speed of only 9600 Baud Ports A & B
may not function correctly
?
See
the Kantronics Manual for the MODE B & P
commands
?
I
also use SOFT CD (For open Squelch)
?
73
Mike Melnik-N9PMO
BPQ32 Group Moderator
