Hi John,
I'm not certain but I don't think the filtering is working on aliases (maybe it wasn't designed to?).
Here's some output on my terminal from W9GM-7 over an HF channel.
c w9gm-7
*** Connected to W9GM-7
Welcome to the W9GM BPQ Packet Switch - Ken in La Crosse, WI - EN43
Type ? (enter) for Commands
n c gb7*
GMNOD:W9GM-7}
Nodes
BEX:GB7BEX-7 CRGWAY:GB7CIP-5 CORLEY:GB7COV-11 NDEVON:GB7COW-5
STHGTE:GB7KUX YEWBBS:GB7YEW
n crg*
GMNOD:W9GM-7}
Nodes
Should N CRG* have found CRGWAY:GB7CIP-5 ?
The N C GB7* worked okay. In fact I found out you don't even need to specify the 'C' as it seems to default to search by call.
It's still a lot more useful than it was though :)
73
Sholto
K7TMG
toggle quoted message
Show quoted text
On 6/25/2022 8:33 AM, John G8BPQ wrote:
The latest versions in my Beta download area should support ? and * wildcards
If you want to sort by call the C can be placed before or after the pattern, eg N C GB7* or N GB7* C
73,
John
On 25/06/2022 11:21, Julian wrote:
Thnx John.
Things like, ex:
*IPU
GB7*
*IP*
GB?NWM
etc etc
Thnx agn and 73 de J, M?IPU YO§©FCA
On 25 Jun 2022, 08:37, at 08:37, John G8BPQ<john.wiseman@...> wrote:
From the docs: Nodes The NODES command displays information from
the NETROM Nodes table. There are a number of options. N on its
own displays the whole table in alias order N C displays the whole
table in callsign order N T displays round trip time and packet
count for all stations that the node has sent packets to. N CALL
or N Alias displays information for the specified call+ssid or
alias. N CALL* will display information for all SSID's of the
specified call. N VIA CALL will display all stations reachable via
the specified neighbour. I'll look into adding some form of
pattern matching 73, John On 22/06/2022 21:08, Mark Taylor wrote:
The only formats I know are: nodes call-ssid (i.e. nodes N5MDT-3)
nodes alias (nodes mdtrms) nodes call* (nodes N5MDT*) Where call*
will find all SSIDs used with that call. You either need to know
the full call or full alias to use these. Hopefully John has some
sorting built into it. For me I just keep my nodes list short...
