开云体育

Chuck,

It should work if you configure Direwolf to use rigctld (radio tye 2 I think), connecting to port 4532 on the BPQ system. You don't need to run a real rigctld - BPQ emulates it. I haven't tried it with Direwolf, but it does work with other software.

If you are using the UZ7HO driver for Direwolf you should add PTT CI-V to the address line.

You can't add RIGCONTROL to a KISS port, so if you are using KISS you'd have to add another port to put the RIGCONTROL lines in, and to use in your RADIO lines for forwarding.

73,
John

Hi, John:

?Thanks.
diffs:
I am using radio type 3070. I can try type 2.
I am not using the UZ7HO driver. I will look into this.
Aha! I am using a KISSPORT in direwolf. So, I will try to configure another PORT/ENDPORT.

All:

?Anyone have a sample/simple PORT configuration for controlling a radio (IC-7100) from bpq32.cfg.
I tried:

PORT
? PORTNUM=6???????????????? ; Port number
? TYPE=ASYNC
? IPADDR=127.0.0.1????????? ; This host
? TCPPORT=4432????????????? ; HAMLIB=4432
? SPEED=19200?????????????? ; Set to the serial speed of the radio
? CHANNEL=A???????????????? ; TNC channel
? RIGCONTROL
??? /dev/ttyUSB71A 19200 ICOM IC7100 88 HAMLIB=4532
? ****
ENDPORT

and got:

Source record not recognised - Ignored:RIGCONTROL

Source record not recognised - Ignored:/dev/ttyUSB71A 19200 ICOM IC7100 88 HAMLIB=4532

Source record not recognised - Ignored:****

...
Initialising Port 01???? AXIP
Initialising Port 03???? Telnet Server
Initialising Port 04???? AXIP
Initialising Port 05???? TCPKISS IP 127.0.0.1 Port 8001 Chan A
Initialising Port 06???? TCPKISS IP 127.0.0.1 Port 4432 Chan A
Starting Mail
Config File is /home/pi/linbpq/linmail.cfg
Config Processed
Mail Started
Connect Failed for KISSTCP Port 6 - error code = 111


?I guess I need more. ?

Chuck