I think that is because the modulation source for D1 is set to ACC and for D2 to USB. The BPQ code switches the source for D1, so both should work on D1. I'll make that change and if it doesn't work I'll have to look to changing data mode, but that is more difficult.
73,
John
toggle quoted message
Show quoted text
On 14/02/2021 23:18, RICHARD G FISHER Owner wrote:
John
If I use D1 get no power out
on VARA if use D2 works fine in VARA
Rich NS7K
----- Original Message -----
From: John Feist <wq6n73@...>
To: [email protected]
Sent: Sun, 14 Feb 2021 17:20:46 -0500 (EST)
Subject: Re: [bpq32] BPQ32, IC7610, SCS MODEM, VARAHF
Hi Rich, my IC7600 operates as JohnW mentioned. Both the SCS Dragon, on the
ACC, and the VARA HF, on the USB soundmodem, use the same USB-D1. For 20m
and above they both use LSB-D1.
I am curious if ICOM made a firmware change that forces the use of D2?
Another wonderful thing is that I can assign a different antenna to the
desired band. For me, I use 10-40m on antenna 1 and 80m on antenna 2. No
manual switching is needed.
73, JohnF
On Sun, Feb 14, 2021 at 1:52 PM RICHARD G FISHER Owner <
rfisher590@...> wrote:
John
My SCS modem is connected to ACC USB D!
and to use the sound card in the radio it has to be USB D2 don't know if
this
will help.
Thank you for all your hard work
Rich NS;7K
----- Original Message -----
From: John G8BPQ <john.wiseman@...>
To: [email protected]
Sent: Sun, 14 Feb 2021 04:12:05 -0500 (EST)
Subject: Re: [bpq32] BPQ32, IC7610, SCS MODEM, VARAHF
The code does not have support for the IC7610. With the IC7600 the
rig is left in Data 1 when using sound card modes, but the input
source is switched from ACC to USB when transmitting. Would the same
approach be ok for the 7610 as well?
73,
John
On 13/02/2021 21:35, RICHARD G FISHER
Owner wrote:
Any help with BPQ32 I am running a IC7610 and SCS modem and trying
to use VARAHF
everything works great until I try and connect to the VARA part.
I am running the
SCS modem on D1 and VARA on D2 it will not automatic change from
D1 to D2 it still
thinks it should be in D1. If I change the radio manually to D2
VARA works great.
I can send a copy of my config file. Ray helped me get this far.
Rich NS7K
