I am confused with how to use the ipgateway. 192.168.1.102 is a
ip-address that does not exist in my network, it is in a DMZ.
The AXIP map statement to my partner node look like this.
MAP PI1BDG 44.137.1.81 UDP 10093 B
My bpq32.cfg
IPGATEWAY
Adapter eth0
44ENCAP 192.168.1.102
IPAddr 44.137.31.70
IPNetmask 255.255.255.224
IPPorts 1,2,3,4,5
The routes is missing in routing table.
ipr 44.137
LAPNOD:PI1LAP} 784 Entries
44.137.0.0/16 10 T 1 3557 encap 213.222.29.194
44.137.1.208/28 0 T 1 3557 encap 88.198.97.130
I can ping from the linux prompt to my partner node.
I can also setup a telnet connect to the remote system.
pi@pancake:~/linbpq $ ping 44.137.1.81
PING 44.137.1.81 (44.137.1.81) 56(84) bytes of data.
64 bytes from 44.137.1.81: icmp_seq=1 ttl=60 time=184 ms
64 bytes from 44.137.1.81: icmp_seq=2 ttl=60 time=487 ms
And can ping from the node
Connected to TelnetServer
ping 44.137.1.81
LAPNOD:PI1LAP}
OK
Ping Response from 44.137.1.81
But, the axip link doesn`t come online. If I look at the tcpdump of the
LinBPQTAP the reaction of bpq32 is with the ip-address of the host and
not my ampr IPAddr 44.137.31.70
10:35:13.026804 IP 44.137.1.81.10093 > 192.168.1.101.10093: UDP, length 256
10:35:19.418391 IP 192.168.1.101.10093 > 44.137.1.81.10093: UDP, bad length 256 > 224
10:35:19.418427 IP 192.168.1.101 > 44.137.1.81: ip-proto-17
10:35:23.030442 IP 44.137.1.81.10093 > 192.168.1.101.10093: UDP, length 256
10:35:24.453469 ARP, Request who-has 44.137.1.81 tell 192.168.1.101, length 28
10:35:24.535545 ARP, Reply 44.137.1.81 is-at 02:42:50:51:01:46, length 46
10:35:27.444957 IP 192.168.1.101.10093 > 44.137.1.81.10093: UDP, length 17
Does anyone have any idea what I'm doing wrong here.
73 Niels PD9Q
PORTS 0x21f9c8 LINKS 0x224070 DESTS 0x226eb4 ROUTES 0x22d6b4 L4
0x230ab4 BUFFERS 0x23d410
Initialising Port 01 TCPKISS IP 127.0.0.1 Port 8001 Chan A
Initialising Port 02 TCPKISS IP 127.0.0.1 Port 8001 Chan B
Initialising Port 03 AXIP
Initialising Port 04 Telnet Server
Initialising Port 05 Loopback
IP Using eth0
Successfully connected to TAP interface LinBPQTAP
TAP brought up
TAP MTU set to 256
Route to 44/9 added via LinBPQTAP
Route to 44.128/10 added via LinBPQTAP
Net44 Tunnel opened on PCAP device
IP Support Enabled
Using Shared Memory /BPQAPRSSharedMem
Map APRS Shared Memory Allocated at 0x43000000
APRS Digi/Gateway Enabled
slave device: /dev/pts/1. symlink to /home/pi/fbbded created
TNC Emulator Init Complete
