There are a couple of possible problems here. It may just be the way
you've pasted your bpq32.cfg into the email, but you show two Telnet
ports, and your APPLICATION line has ^M on the end.
?APPLICATION 1,RMS,C 1 CMS,KC5QOC-10^M
73,
John
On 09/02/2021 08:34, John H Mocho
wrote:
toggle quoted message
Show quoted text
I recently tried to reinstall an RMS gateway on a raspberry pi
using linbpq
The hardware worked fine. I installed the latest version if
Raspbin on a new SD card
I followed the same steps i had used before to get libbpq up and
running.
I logged in via the web interface on a remote PC and was able to
get to CMS ad find I had no messages.
The telnet part worked fine.
The I added the TNC-PI port by copying it from the instructions vi
cut and paste so no errors there.
I made the necessary edits to the WL2KREPORT for callsign and grid
square.
I the attempted to initiate an RMS Express session. It connects
and just sits there,
I disconnected the RMS Express session and went into my easyterm
session and connected to the site.
Like this:
*** Connected to station KC5QOC-10 2/9/2021 1:18:22 AM
Upon entering the ? to get a list of commands I see this:
:>?
KC5QOC} RMS CONNECT BYE INFO NODES PORTS ROUTES USERS MHEARD
So I tried the RMS command
:>RMS
Trying ec2-52-205-99-163.compute-1.amazonaws.com
*** KC5QOC-3 Connected to CMS
[WL2K-5.0-B2FWIHJM$]
;PQ: 84113130
CMS via KC5QOC >
:>bye
Disconnecting...
Worked as expected.
Does anyone have a suggestion as to what I am doing wrong?
Here is my bpq32.cfg with the passwords changed:
; Basic RMS configuration
SIMPLE ; This set a whole load of paramters to reasonable defaults
LOCATOR=DM65QD ; Set to your Grid Square to send reports to the
BPQ32 Node Map system
NODECALL=KC5QOC
INFOMSG:
KC5QOC's RMS Gateway
***
PORT
?ID=Telnet Server
?DRIVER=TELNET
?CONFIG
?LOGGING=1
?CMS=1 ; Enable CMS Gateway
***^
PORT
?ID=Telnet Server
?DRIVER=TELNET
?CONFIG
?LOGGING=1
?CMS=1 ; Enable CMS Gateway
?CMSCALL=KC5QOC ; CMS Gateway Call for Secure CMS Access(normally
same as NODECALL)
?CMSPASS=PASSWD ; Secure CMS Password
?HTTPPORT=8080 ; Port used for Web Management
?TCPPORT=8010 ; Port for Telnet Access
?FBBPORT=8011 ; Not required, but allows monitoring using
BPQTermTCP
?MAXSESSIONS=10
?CloseOnDisconnect=1 ; Close Telent Session when Node disconnects
?USER=kc5qoc,PASSWD,KC5QOC,"",SYSOP
?ENDPORT
?; Add Radio Port(s) Here
PORT
?ID=1200 Baud 145.010
?TYPE=ASYNC
?PROTOCOL=KISS
?CHANNEL=A
?COMPORT=/dev/serial0
?SPEED=19200 ; Must by 19200 for TNC-Pi
?MAXFRAME=4
?FRACK=8000
?RESPTIME=1500
?RETRIES=10
?PACLEN=128
?KISSOPTIONS=PITNC,NOPARAMS
?WL2KREPORT PUBLIC, , 8778, KC5QOC-10, DM65QD,
00-23, 145010000, PKT1200, 10, 20, 5, 0
ENDPORT
?APPLICATION 1,RMS,C 1 CMS,KC5QOC-10^M
; EOF
