开云体育

10F 51-52 Countershaft Rocker Handle

Bryan All Messages By This Member #116857 Does anyone have a CAD-esque drawing for this part? Or the relevant specs handy?? I caught my finger (again) today and figure I should finally go ahead and make one.? Thanks in advance!? Bryan
Bill Buckalew All Messages By This Member #116868 Measurements from my 10F: 0.40 Inch OD x 5.50 Inch total length.? Both ends? 7/16NF X 0.47 thread length -- US;USAEDFE, 72-74
Natius van der Watt All Messages By This Member #116873 Not all the dimensions are 100% and this travers housing is way off compared to mine but its a very good starting point... toggle quoted message Show quoted text On Fri, 23 Aug 2024 at 16:31, Bill Buckalew via <bill70j=[email protected]> wrote: Measurements from my 10F: 0.40 Inch OD x 5.50 Inch total length.? Both ends? 7/16NF X 0.47 thread length -- US;USAEDFE, 72-74
Bryan All Messages By This Member #116875 Thanks I appreciate it! toggle quoted message Show quoted text On Fri, Aug 23, 2024, 2:03 PM Natius van der Watt via <vnatius=[email protected]> wrote: Not all the dimensions are 100% and this travers housing is way off compared to mine but its a very good starting point... On Fri, 23 Aug 2024 at 16:31, Bill Buckalew via <bill70j=[email protected]> wrote: Measurements from my 10F: 0.40 Inch OD x 5.50 Inch total length.? Both ends? 7/16NF X 0.47 thread length -- US;USAEDFE, 72-74
mike allen Member Profile All Messages By This Member #116876 开云体育 ??? MAn that guy spent some time on that . Nice work . ??? animal On 8/23/24 10:52 AM, Natius van der Watt wrote: toggle quoted message Show quoted text Not all the dimensions are 100% and this travers housing is way off compared to mine but its a very good starting point... On Fri, 23 Aug 2024 at 16:31, Bill Buckalew via <bill70j=[email protected]> wrote: Measurements from my 10F: 0.40 Inch OD x 5.50 Inch total length.? Both ends? 7/16NF X 0.47 thread length -- US;USAEDFE, 72-74

Previous Topic Next Topic