That would be awesome... but shipping it to South Africa will probably cost more than the part...?

On Tue, 5 Nov 2024 at 08:20, Andrei via <calciu1=[email protected]> wrote:

I am sure someone on the list has a decent mill and could make one for you.

Get

---

From: [email protected] <[email protected]> on behalf of Natius van der Watt <vnatius@...>
Sent: Tuesday, November 5, 2024 1:15:27 AM
To: [email protected] <[email protected]>
Subject: Re: [atlas-craftsman IO] QCGB banjo needed

?

This could be handy; where is this section with drawings Mike?

I also need a banjo but I do not have a mill. So I figured if I could draw up the banjo in CAD, I could split it into layers and have separate pieces of sheet metal laser cut and the, rivet these together to get the profile with slots and grooves.?

Any thoughts on this?

On Tue, 5 Nov 2024 at 04:15, mike allen via <animal=[email protected]> wrote:

I forgot to mention that if ya contact Clausing who bought Atlas Press way way back & they no longer have the part for sale they will send ya a copy of the print so ya can make yer own . Also if ya check in the files section under17 Drawings, Atlas or Craftsman Machine Parts?

there are a bunch of drawigs for lathe parts .

animal