Re: Drive Coupler Not Staying Engaged, Craftsman 101.21200 MK2
|
Good possibility. A little WD-40 or some brake cleaner might free it up.?
Bill in OKC
William R. Meyers, MSgt, USAF(Ret.)
Aphorisms to live by: Good judgement comes from experience. Experience comes from bad judgement.? SEMPER GUMBY!
Expect in one hand, expectorate in the other. See which one gets full first.
On Friday, January 19, 2024 at 02:20:51 PM CST, perry7122 <perry7122@...> wrote:
? ? I have been known to engineer things before.
? ? With this ball not exiting the hole when taken off the shaft, I am wondering if it is being retained by dried grease in the hole?
On Friday, January 19, 2024 at 02:03:13 PM EST, mike allen <animal@...> wrote:
??? ??? Every time this subject comes I keep going back to this .
??? animal
On 1/19/24 4:25 AM, Brian Roberts
wrote:
Having worked many years in a production / prototyping machine
shop I am reminded of dealing with "the engineers"!
If a ten cent/ten minute solution is a possibility....well....we
must first try the hundred dollar/ two week stab in the dark!
Why the resistance to replacing the original spring with one that
approximates the original strength...or one that (for testing
purposes) is even a bit stronger?
My comment is meant to be a good-natured (but serious) question.?
?LOL
|
Bill in OKC too