Re: OT-how to test and repair DC brushed motors.
|
Bill, check to make sure you are gettint power to the motor. VOLT Meter across each part in the circuit including ground. ? ? ? ?Motor looks similar to 80's gm Electric wi dow motors. Look for a match at auto parts store. ? ? ? ?ALso looks similar to those used on trailer toung jacks. ? ? ? ? Good luck and keep us posted.k[j
On Friday, August 11, 2023 at 12:10:17 PM EDT, Bill in OKC too via groups.io <wmrmeyers@...> wrote:
SWMBO' s power wheelchair lift crapped out the other day. New motor is no longer available since the lift is ancient. Manufacturer of the lift removed any OEM markings. It's a right- angle gear motor, which I'll eventually have some photos and dimensions for. This is the in-and-out motor for a Harmar AL-600 lift that fits in the back of a van. Near as I can remember it was made about 2007 or so.?
There is no continuity in the motor, but? othinf seems burned. I pulled it apart and fiddled with it, and got continuity back. Hooked it back up to power trying to get a current draw reading and it spun up and? rapped out again. No continuity again. Brushes look good.?
I have a megger for testing? insulation, and an assortment of DVMs and at least one analog voltmeter. Somewhere in the library are a couple of older books on motor testing and repair, but haven't found them yet. Any suggestions for resources? I looked at Grainger & McMaster-Carr, also Amazon & Surplus Center. They have similar gear motors but nothing that looks exactly? right. Most are either way too light or way too heavy. This is a 12vdc motor, could draw as much as 20amps, but probably closer to 10, and could less. There is another motor on it with a different gearbox. Looks to be about the same motor. May fiddle with that, and get a current draw.
Found one of these motors for sale on the knoppix site for $600, was $400 from Harmar at one time. Seems a bit fishy to me, and can't afford it anyway.?
Gotta get ready to take SWMBO to get fitted for a new CPAP mask, and for both of us to get new CPAP machines. Hope someone can point me in a useful direction. Used to be a bunch of folks whe rebuilt motors & alternators/generators around here. Called one and they don't do DC motors at all, and don't think there's anyone left who does.,
Any help will be appreciated!
Bill in OKC?
|
