开云体育

Single Messages Topics Expanded Polls

Re: Quick Change Post

Andrei All Messages By This Member #102636 开云体育 You are right about the Yuasa piston. It is the only one that i know of that is acceptable. For all other imports just get wedge. Get toggle quoted message Show quoted text From: [email protected] <[email protected]> on behalf of Robert Downs via Groups.Io <wa5cab@...> Sent: Thursday, February 7, 2019 1:28:16 AM To: [email protected] Subject: Re: [atlas-craftsman IO] Quick Change Post ? In most Chinese cases I would agree with you.? But how badly depends upon the size and shape of the piston.? Most of the Chinese made piston-type tool posts have a very small round piston.? The Yuasa, which was I think the first piston type made some 40 odd years ago, has a larger rectangular piston.? I bought one new 38 years ago (when the cost in 2019 Dollars was about three times what the CDCO one costs today) and have never felt that it was inferior to the wedge type.? Fortunately, the holders will fit either type. ? Robert Downs ? From: [email protected] [mailto:[email protected]] On Behalf Of Andrei Sent: Wednesday, February 6, 2019 20:45 To: [email protected] Subject: Re: [atlas-craftsman IO] Quick Change Post ? Piston sucks. Get wedge Get ? From: [email protected] <[email protected]> on behalf of Stan Gorodenski <stanlep@...> Sent: Wednesday, February 6, 2019 9:43:21 PM To: [email protected] Subject: Re: [atlas-craftsman IO] Quick Change Post ? Kurt, I looked in CDCO, cdcotools.com, but I cannot copy a link to the post and tool holders because the page I am looking at doesn't have a link to it. However, it is item #29461 and includes the quick change post and 5 tools holders. It is called AXA Piston Type Tool Post for Lathe up to 12" and in the description it specifically says it fits an Atlas 10" and 12" Stan On 2/6/2019 1:26 PM, Kurt Sierens wrote: I would go with an AXA.? I bought mine from CDCO (Bostar) and it has worked out well. Kurt S. From: [email protected] <[email protected]> On Behalf Of Stan Gorodenski Sent: Wednesday, February 6, 2019 3:24 PM To: [email protected] Subject: [atlas-craftsman IO] Quick Change Post I have the Atlas 10" lathe. I do not know what the center to center is, but the bed length the carriage rides on is almost 36" from where it meets the headstock to the end of the bed. In this group it had previously been determined that it is of vintage 1957 or so. I would like to replace the rocker tool holder with a quick change tool holder. Can anyone recommend a good one for this lathe? Stan

View All 41 Messages

#102636

Join [email protected] to automatically receive all group messages.