Stan, no, I would recommend the wedge type holder. I think I bought mine through eBay.
Kurt S.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
toggle quoted message
Show quoted text
-------- Original message --------
From: Stan Gorodenski <stanlep@...>
Date: 2/6/19 9:46 PM (GMT-05:00)
Subject: Re: [atlas-craftsman IO] Quick Change Post
Opps. I forgot the punch line which is:
Is this the one you are recommending?
On 2/6/2019 7:43 PM, Stan Gorodenski wrote:
Kurt,
I looked in CDCO, cdcotools.com, but I cannot copy a link to the post
and tool holders because the page I am looking at doesn't have a link to
it. However, it is item #29461 and includes the quick change post and 5
tools holders. It is called
AXA Piston Type Tool Post for Lathe up to 12"
and in the description it specifically says it fits an Atlas 10" and 12"
Stan
On 2/6/2019 1:26 PM, Kurt Sierens wrote:
I would go with an AXA.? I bought mine from CDCO (Bostar) and it has
worked out well.
Kurt S.
*From:* [email protected] <[email protected]> *On
Behalf Of *Stan Gorodenski
*Sent:* Wednesday, February 6, 2019 3:24 PM
*To:* [email protected]
*Subject:* [atlas-craftsman IO] Quick Change Post
I have the Atlas 10" lathe. I do not know what the center to
center is,
but the bed length the carriage rides on is almost 36" from where it
meets the headstock to the end of the bed. In this group it had
previously been determined that it is of vintage 1957 or so.
I would like to replace the rocker tool holder with a quick change
tool
holder. Can anyone recommend a good one for this lathe?
Stan
