I agree and have seen a bit of that done on youtube.
What does one use for that and where is a good place to get it?
Don
toggle quoted message
Show quoted text
On 1/23/2019 12:53 PM, Jay Greer wrote:
Don,
Looks like a bit of clean up will be heeded!
Wishing you lots of fun with your keen project. ?You might need to
scrape that bed in or have it ground.
Cheers
Jay Greer
On Jan 23, 2019, at 9:13 AM, Don Newbold <d.o.newbold@...
<mailto:d.o.newbold@...>> wrote:
Thanks for the warm welcome.
Here are a couple photos of their current condition.
The Atlas is complete and well oiled.
The Sears is covered in saw dust as it had been sitting in a wood shop
for years. There is no id plate, neither on the end nor the back. It is
complete except for a motor.
Both are sitting covered as I try to convert a 50x6 room along the front
of my house from a greenhouse to shop space.
Don
On 1/22/2019 5:57 PM, Bill Buckalew via Groups.Io wrote:
Don:
Welcome!? Glad to have you join us.
Do you have some photos of your machines to share?
Bill
On Tuesday, January 22, 2019, 12:50:07 PM PST, Don Newbold
<d.o.newbold@... <mailto:d.o.newbold@...>> wrote:
Hi,
I'm new to the group. I've done virtually no machining since high
school
(over 40 years ago), but in the last year have acquired an Atlas
618, an
identical Sears lathe with the milling attachment and a Levin
lathe. The
618 was working before disassembly for moving. The Sears hadn't
seen use
in decades, though it still looks to be in good condition. I've got
manuals for both and numerous accessories. The Levin hadn't seen
use in
some years and needs restoration. The Levin was bought by NASA in the
early 60's and was used to make parts that went to the moon. I'm a
software engineer by trade, but like projects at home.
That's it,
Don
On 1/22/2019 5:17 AM, [email protected]
<mailto:[email protected]> Group Moderators wrote:
Hello,
Welcome to the [email protected]
<mailto:[email protected]> group at Groups.io
<>, a free,
easy-to-use email group service. Please take a moment to review this
message.
To learn more about the [email protected]
<mailto:[email protected]> group, please visit
/g/atlas-craftsman
To start sending messages to members of this group, simply send
email to
[email protected] <mailto:[email protected]>
If you do not wish to belong to [email protected]
<mailto:[email protected]>, you may
unsubscribe by sending an email to
[email protected]
<mailto:[email protected]>
To see and modify all of your groups, go to
</>
Regards,
The [email protected] <mailto:[email protected]>
Moderator
<>
Virus-free. www.avg.com <>
<>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
<20190122_192649.jpg><20190122_192331.jpg>
