¿ªÔÆÌåÓýRobert, have you ever checked the locations of the bull gear holes? Sent from my Boost Mobile Phone. ¿ªÔÆÌåÓý-------- Original message -------- From: Jody <jp4lsu@...> Date: 1/17/19 3:06 PM (GMT-05:00) Subject: Re: [atlas-craftsman IO] Carriage Stop and Indicator -Jody -------- Original message -------- From: "Robert Downs via Groups.Io" <wa5cab@...> Date: 1/17/19 1:45 PM (GMT-06:00) To: [email protected] Subject: Re: [atlas-craftsman IO] Carriage Stop and Indicator Yes, there are 60 indexing holes in the bull gear. ? Robert Downs ? From: [email protected] [mailto:[email protected]] On Behalf Of Jody ? Nicely done. Don't have either of these things unfortunately.? One day.... ? I seem to remember the indexing marks on my bull gear were not 100 but maybe 60 or something.? I'll go back and count.? -Jody
? Jody: ? I used a horizontal rotary table on the mill with a ground HSS tool in the spindle to cut the dial graduation lines.?? ? The bull gear on my Atlas is one that has the indexing holes, but it was easier done on the mill. ? I rigged up a jig on the mill table to stamp the numbers. ? HTH,? Bill ? ? ? ? Bill, ? On Wednesday, January 16, 2019, 11:39:17 AM PST, Jody <jp4lsu@...> wrote: ? ? Bill, |
