开云体育

Here is the 1st boot of just the Z80MC CPU board!? yippee!
Finished it last week but it had no clock. Found out that my use of a 74LS368 was not a good Idea, so I put an order in to Mouser for an HC368 as Lee designed it for, got it today and in business with the zed80...sweet!!

@@@@ @ H?
Hard Reset 01
AF =1D68? BC =0840? DE =FF80? HL =FFFF
AF'=01FF? BC'=FFFF? DE'=FFFF? HL'=00C3
IX =FFFF? IY =FFFF? IR =001D? PC =FFFF? SP =FB00
Press M for Monitor..............................
????????????????????????????????????????????????? MICRO-BASIC COPYRIGHT 1983 BY DAVE DUNFIELD
READY
?NO PROGRAM ERROR
READY
10 PRINT "HELLO WORLD";
20 GOTO 10
LIST
0010 PRINT "HELLO WORLD";
0020 GOTO 10
READY
RUN
?SYNTAX ERROR IN LINE 0010
READY
10 PRINT "HELLO WORLD"
RUN
HELLO WORLD
HELLO WORLD
HELLO WORLD
HELLO WORLD
HELLO WORLD
HELLO WORLD
STOP IN LINE 0020
READY

Here is a pic of it (note to the top right with a discrete clock, now disconnected) also showed me that the chip enable's needed the HC368 as well.


Notice the (white) Mostek Z-80 from 1977! Wow, I was very careful bringing that up power wise too.

Well next I will need to replace the LS245 and LS273 with HC's as well but Mouser did not have any of these on hand.
Might work OK but well see.? Also I will be finishing the front panel card and the SIO card as well in the next few days so wish me luck.? 8-)

-Tony