Re: Unable to get SIO card working
|
Hi Morgan,
Sorry, I missed this email post.? Ok, so where are you at now?? If you boil it down, the circuit either fails because of a bad component or bad circuitry.
It's a slow process, but perhaps you can remove most chips and start ohming every trace?? Ohm it along the way from point a to b for shorts with adjacent traces.
Cheers,
Josh
On Saturday, September 19, 2020, 09:05:10 p.m. EDT, Morgan <mhtbx118@...> wrote:
Hello Josh,
Unfortunately I don't have one of those to test with. I'm mostly limited to just a multimeter at the moment.
Thanks,?
Morgan
|
