How do you fasten legs to a module that only has a wooden frame and
no
wooden support for the foam deck?
Hello Pierre,
The MidweZt HaulerZ enjoy options. That is why I made legs that screw
into my modules. We like to display our modules on a table top for
better viewing by kids and anyone else who might be height
restricted. I put a 2" X 2" block of wood in each corner of my
modules to support the legs. When we display on table tops, we use
1/4-20 X 2" or 3" carriage bolts to level the modules. When we
display with others (like at NTS 2005) I attach 1" PVC pipe legs to
the same leg supports. One of our members uses banquet table legs
with conduit extensions mounted to separate pieces of wood that he
attaches to his module with screws through the frame. I've posted
pictures of my module legs and support in the Photos section of this
group under "Thom'Z ModuleZ"
If you've got a "standard" 2' X 4' module, and you intend to set up
at only one height, I would suggest the banquet legs mounted to a
separate piece of wood mounted to the frame for stability.
I've always tried to keep as many options open as possible while
still keeping things simple.
I hope this helps,
Thom Welsch
MidweZt HaulerZ
