开云体育

Sent: Thursday, May 6, 2021 2:01 PM To: [email protected] Subject: [YardbirdTrains] Mantua Motor Need a Replacement motor for Early Mantua Reading Goat Original motor # 724,

Need a Replacement motor for Early Mantua Reading Goat Original motor? # 724, PM-1 Paul Kayne

I asked this a couple of years ago, didn't get an answer for the 2-8-0's. I need to get a few regear kits for my unbuilt MDC kits.? NWSL has a a kit that fits 1998 and later kits. But how does one

Dave, am very interested in an "Old Lady."? And if the price is kinda low, one each of the others (unless the fever subsides)...I "restored Varney Old Lady 2-8-0's, Mantua Version 2 Mikados, Penn

Dave do you have any C&O Lionel FA locos? frank? ? ? ? ? ? ? ? toptrain1@...

Would like to join this group the gain information on yardbirds

Dave, This is a possibility but making one of these bearings is the last resort for me. I have plenty of projects to keep me busy until one of them turns up and sooner or later it will. John Bopp

McMaster-Carr has close: For 3/32" Shaft Dia. 1/4 " 1/4 " 46 lbs. @ 120 rpm Lubricated SAE 30 Oil -35° to 300° 6391K484 ( https://www.mcmaster.com/6391K484 ) 15.78 You can get them in about any

Agreed, probably not Mantua. And, yes, Dan would have had them. John Bopp

I found two in the bin. Shaft that fits is .101", OD is .230, length is .155. So probably not for the Mantuas.

When I restored my three, I found parts locos....didn't mind stripping out a Zamac-Rot chassis. Let me look in the parts bin. If Dan was still around, he'd have had them.

Dave, Thanks for the tip on the early Mantua Mike. It's not one I'm familiar with so I didn't realize it also has the 6303 bearing. I'll keep an eye out for one but I'd still like to find just one

The size you gave looked familiar. I just checked, the Version one and Version 2 Mikado (gearbox bolts down to the frame) is a 6303 at both

Getting to that point. The 3-rail is staying in the basement, the LS outside...even tho with lockdowns haven't had a revenue run in 11-1/2 months. I've got what I thought was over 30 restored engines,

DAVE ! I'm still here , got lots of moderators . you're packin' up ? Sorry to hear hear? . Godspeed .

Henry used to be the moderator of this group. Is he still around? Just interested is all.? Dave

Age, storage, all that. Half 0, mostly vintage, Roundhouse, Varney (including a dozen or so metal Varney high cars), Ulrich, some early cardstock Varney freight, restored Varney Old Lady 2-8-0's (3),

Spring drive, with three grooves, were on the three piece gear boxes, same as the Brute drivers. The one piece gears boxes with the open bottoms (i.e. Walt Disney or Mickey Mouse) were the same for F

Hi John, Mine both; A&B units are spring belt models... gonna mod them to power the front truck too on both. Btw, is it true the front trucks on the Varney switcher and F-units excluding the side

Brute drive or Walt Disney drive. John Hagen Sent: Saturday, November 21, 2020 10:12 AM To: [email protected] Subject: [YardbirdTrains] Looking for a set of Varney F Unit front*