Keyboard Shortcuts
Likes
- YamahaYMF7x4
- Messages
Search
|
Re: EL 900 VL and plg100vl in PSR9000Pro
Just to clarify, an EL900 VL voice consists of a VA element (which to my knowledge cannot be edited) and Control Changes, RPN's and NRPN's (which can be edited hopefully by the 9000pro's Easy Edit or, if not, an XG editor set up to not send system-exclusive commands).
|
|
Re: EL 900 VL and plg100vl in PSR9000Pro
Its interesting that I could possibly use the 9000 to edit the VL voices in the EL900.? I know of the El-Edit but expensive for them and I cannot seem to get any replies from John Beesley so far. On Tue, Apr 2, 2024 at 4:33?AM Greg Holwell via <gholwell60=[email protected]> wrote: You may be interested in this:?? |
|
Re: EL 900 VL and plg100vl in PSR9000Pro
I should have read the 9000pro manual before posting (or was that boasting?) about other PLG hosts. The 900M's EL and XG modes both support control changes 72 and 73 for Release and Attack respectively, but I could not find mention of the controller for Decay (Non-Registered Parameter Number 228 on XG).? The Easy Edit mode of the 9000pro's Custom Voice Creator may be of use to send these on the MIDI channel used by the EL900's VA element - if that works you may have no need to buy a PLG board. If otherwise, there seems to be vast differences between the PLG150VL's single VA element per voice and the EL900's structure of 1 VA, 1 AWM and 4 FM elements per voice. |
|
Re: EL 900 VL and plg100vl in PSR9000Pro
You are correct that you cannot edit the VL on the EL900, this is only possible on the 900M, ( wish I could get hold of the update Kit ) but they can be edited or should I say created on external software hence the question, can the editors work on the installed ViLs/boards. On Mon, Apr 1, 2024 at 1:53?AM Greg Holwell via <gholwell60=[email protected]> wrote:
|
|
Re: EL 900 VL and plg100vl in PSR9000Pro
According to the EL900 owner's manual, its Virtual Acoustic voices cannot be edited, and after-touch for these is Control Change 16 (XG Assignable Controller 1). Hardware:? As well as those? in my previous message on this subject, Yamaha-supported PLG150VL hosts include S90, Motif ES and MU2000. A friend had a Kenton Plugstation to house 1 to 4 PLG cards including PLG150VL - I don't know if these are still on the market.. Software: If I recall correctly, the PLGs are shipped with an editor plug-in for Yamaha's XG-Works sequencer,? If you want a more powerful (and more pricey) editor, look at Rudy Verpaele's? (http://vl70m-editor.com/site/ ?)? You may use one of the other editors in the Files section, but they are supplied as-is with no guarantees. |
|
Re: PSR-S910 with the VL Control Surface
I have updated VL Control Surface.zip with the new Mid2VL.For now, it converts only XG voices (such as those you would get out of XG-Gold) to VL. The PSR-S910's DSP1 is almost identical to the VL70m distortion block. The latter gives 3 options - Overdrive, Distortion and 3-band EQ - and supports insertion control depth only for Aftertouch and Assignable Control 1. ? |
|
Re: QY100 with the VL Control Surface
开云体育Cool – lemme know when your setup is complete & if we can do some internet collaborations. ? From: [email protected] On Behalf Of Greg Holwell via groups.io
Sent: Thursday, March 16, 2023 8:39 AM To: [email protected] Subject: Re: [YamahaYMF7x4] QY100 with the VL Control Surface ? The QY100 is long gone, replaced by the PSR-S910, whose sequencer cannot insert additional system exclusive, and Ableton Live 10 Lite with its army of VST's I intend to modify Mid2VL to work on another channel (e.g. your PLG-150VL's 3). and when my 4-in 4-out USB MIDI interface ship comes in I can test the result on my MU10 via XG-Gold. I might also see if I can convert my $108 Novation MIDI controller keyboard to a control surface, it comes with keys, velocity-sensitive pads, and knobs. ? ? |
|
File /VL Control Surface.zip uploaded
#file-notice
Group Notification
The following files and folders have been uploaded to the Files area of the [email protected] group. By: Greg Holwell <gholwell60@...> Description: |
|
Re: QY100 with the VL Control Surface
The QY100 is long gone, replaced by the PSR-S910, whose sequencer cannot insert additional system exclusive, and Ableton Live 10 Lite with its army of VST's I intend to modify Mid2VL to work on another channel (e.g. your PLG-150VL's 3). and when my 4-in 4-out USB MIDI interface ship comes in I can test the result on my MU10 via XG-Gold. I might also see if I can convert my $108 Novation MIDI controller keyboard to a control surface, it comes with keys, velocity-sensitive pads, and knobs. ? ? |
|
Re: QY100 with the VL Control Surface
开云体育Cool.? Would you be able to program the sax solo in Pink Floyds ‘Us and Them’ ? ? From: [email protected] On Behalf Of Greg Holwell via groups.io
Sent: Saturday, March 11, 2023 6:37 PM To: [email protected] Subject: [YamahaYMF7x4] QY100 with the VL Control Surface ? The VL Control Surface was developed using a Yamaha QY100 XG synth/sequencer/rhythm box.? I programmed the QY100 to accept 3-, 4- and 5-note chords on notes C1-F2 on channel 4.? As well as XG system exclusive, whose parameters were given as words rather than numbers, I could also insert non-XG system exclusive such as VL part data (F0 43 10 4C 09 xx xx nn F7). The QY100 also had an extra effects section with Overdrive, Distortion and Amp Simulator, but I did not try using this as if it were the VL70m distortion block (F0 43 10 4C 03 xx xx nn F7).? The results are evident in vldemo.mid . ? |