Keyboard Shortcuts
Likes
- YamahaYMF7x4
- Messages
Search
|
VL Control Surface
1. If your keyboard has a foot volume pedal and no breath control, you? may use the MidiOx map file to convert control change 7's (volume) on Channel 1 to control change 11's (expression) and merge BC-Expression.syx into Vl.syx.
2. A VL70m editor for Windows 7 and above is available at??? ? 3. A forum for VL users is at? |
|
Re: BREATH CONTROLLERS.xlsx
If you want to buy a breath controller you will have to move fast, as in October 2011
Yamaha discontinued manufacture of the BC3A. This file now has all the sysex to assign transmit channel to 1 etc. for each relevant keyboard. This sysex can be copied then pasted into the Midi-ox Sysex window when you are creating Vl.syx, and if then sent to the keyboard will set up VL controllers (most notably control change 13, the default for Embouchure - which controls trumpet pitch and violin bow pressure - unless assigned to pitch-bend as it usually is for saxophones). I have not included some low-end keyboards like the DX21, DX27 and DX100 which are not velocity-sensitive. Nor have I included some high-end keyboards like the CS6X and S80 which can operate stand-alone with the PLG150VL plug-in board, and the EX5 which contains the equivalent of a VL70m anyway. |
|
New file uploaded to [email protected]
[email protected] Notification
Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the [email protected] group. Uploaded By: Greg Holwell <gholwell60@...> Description: Cheers, |
|
New file uploaded to [email protected]
[email protected] Notification
Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the [email protected] group. Uploaded By: Greg Holwell <gholwell60@...> Description: Cheers, |
|
New files uploaded to [email protected]
[email protected] Notification
Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the [email protected] group.
Uploaded By: Greg Holwell <gholwell60@...> Description: Cheers, |
|
File Notifications
#file-notice
[email protected] Notification
The following files have been uploaded to the Files area of the [email protected] group. By: Greg Holwell Description: The following files have been uploaded to the Files area of the [email protected] group. By: Greg Holwell Description: |
|
File /EX5E2.PDF uploaded
#file-notice
[email protected] Notification
The following files have been uploaded to the Files area of the [email protected] group. By: Greg Holwell Description: |
|
Compiling and running Java programs on Windows 95/98/98SE
1.? Download and install Java SE 1.3 () ? ? ?javac <source>.java 5.? Repeat steps 2-4 till compiled cleanly 6.? Issue the following commands ? ? ? move <source>.class "target_folder_name" |
|
The future of VL?
In 2011 I bought a second-hand Yamaha PSR-S910 arranger keyboard having found that on psrtutorial.com there were hundreds of style files for its predecessor the PSR-3000, which was the first top-line PSR to use a USB flash drive instead of floppy disks.? More recently I used in? a registration memory the S910's Super Articulation Saxophone voice, which combines the 4 General MIDI sax sounds into one, detects legato playing to switch seamlessly between monophonic and polyphonic modes, and adds breath noise by a footswitch.? I also found other VL-influenced sounds like GrowlSax, and also "MegaVoice Tenor Sax" which switches sax-type? effects based on velocity sensitivity.? So for now I will not develop this thread, but will keep VL Control Surface around for those who want a cheap way into VL.
|
|
Re: The future of VL?
I was unable to get the PSR-S910's sequencer to generate Sondius-XG midifiles, finding no way to override the selected PSR voice with the requisite Bank Select MSB 97, LSB 112 thru 119. These activate the VL-XG mode of the VL70m, PLG150VL, S-YXG100 and DS-XG (and possibly MU100R) but are treated as Bank Select MSB 0 LSB 1 (Key Scale Panning) by all non-VL XG synths. My Mid2VL program in VL Control Surface.zip could be used as a bit-hack to convert the bank select on channel 1, but it doesn't have the ability to add VL-XG system-exclusive part data (F0 43 10 4C 09 xx xx nn F7) as stored in my .syx initialisation files.
|
|
QY100 with the VL Control Surface
The VL Control Surface was developed using a Yamaha QY100 XG synth/sequencer/rhythm box.? I programmed the QY100 to accept 3-, 4- and 5-note chords on notes C1-F2 on channel 4.? As well as XG system exclusive, whose parameters were given as words rather than numbers, I could also insert non-XG system exclusive such as VL part data (F0 43 10 4C 09 xx xx nn F7). The QY100 also had an extra effects section with Overdrive, Distortion and Amp Simulator, but I did not try using this as if it were the VL70m distortion block (F0 43 10 4C 03 xx xx nn F7).? The results are evident in vldemo.mid . ? |
|
Re: QY100 with the VL Control Surface
开云体育Cool.? Would you be able to program the sax solo in Pink Floyds ‘Us and Them’ ? ? From: [email protected] On Behalf Of Greg Holwell via groups.io
Sent: Saturday, March 11, 2023 6:37 PM To: [email protected] Subject: [YamahaYMF7x4] QY100 with the VL Control Surface ? The VL Control Surface was developed using a Yamaha QY100 XG synth/sequencer/rhythm box.? I programmed the QY100 to accept 3-, 4- and 5-note chords on notes C1-F2 on channel 4.? As well as XG system exclusive, whose parameters were given as words rather than numbers, I could also insert non-XG system exclusive such as VL part data (F0 43 10 4C 09 xx xx nn F7). The QY100 also had an extra effects section with Overdrive, Distortion and Amp Simulator, but I did not try using this as if it were the VL70m distortion block (F0 43 10 4C 03 xx xx nn F7).? The results are evident in vldemo.mid . ? |
|
Re: QY100 with the VL Control Surface
The QY100 is long gone, replaced by the PSR-S910, whose sequencer cannot insert additional system exclusive, and Ableton Live 10 Lite with its army of VST's I intend to modify Mid2VL to work on another channel (e.g. your PLG-150VL's 3). and when my 4-in 4-out USB MIDI interface ship comes in I can test the result on my MU10 via XG-Gold. I might also see if I can convert my $108 Novation MIDI controller keyboard to a control surface, it comes with keys, velocity-sensitive pads, and knobs. ? ? |
|
File /VL Control Surface.zip uploaded
#file-notice
Group Notification
The following files and folders have been uploaded to the Files area of the [email protected] group. By: Greg Holwell <gholwell60@...> Description: |
|
Re: QY100 with the VL Control Surface
开云体育Cool – lemme know when your setup is complete & if we can do some internet collaborations. ? From: [email protected] On Behalf Of Greg Holwell via groups.io
Sent: Thursday, March 16, 2023 8:39 AM To: [email protected] Subject: Re: [YamahaYMF7x4] QY100 with the VL Control Surface ? The QY100 is long gone, replaced by the PSR-S910, whose sequencer cannot insert additional system exclusive, and Ableton Live 10 Lite with its army of VST's I intend to modify Mid2VL to work on another channel (e.g. your PLG-150VL's 3). and when my 4-in 4-out USB MIDI interface ship comes in I can test the result on my MU10 via XG-Gold. I might also see if I can convert my $108 Novation MIDI controller keyboard to a control surface, it comes with keys, velocity-sensitive pads, and knobs. ? ? |
|
Re: PSR-S910 with the VL Control Surface
I have updated VL Control Surface.zip with the new Mid2VL.For now, it converts only XG voices (such as those you would get out of XG-Gold) to VL. The PSR-S910's DSP1 is almost identical to the VL70m distortion block. The latter gives 3 options - Overdrive, Distortion and 3-band EQ - and supports insertion control depth only for Aftertouch and Assignable Control 1. ? |