开云体育

I’ve had issues using “newer” Midi interfaces on old software.?It might be possible due to the speed of the interface. If you can, try with an old usb interface. I keep a Generation 1 midisport 4x4 USB (from the early 2000) for this type of situations and it always solved the issues, even running on emulation.?

Hi there! I also had this issue with the dialog box on my MacBook (OS X High Sierra, WineHQ v8.0.1) and Linux PC (Linux MX, WineHQ v7.0) when QY70 connected via MIDI cables (5-pin DIN).

1. Test if the MIDI ports of the sequencer work as expected (see pg.16-18 of the service manual).
- TO HOST switch set to MIDI
- connect the [MIDI IN] to the [MIDI OUT] terminal via a MIDI cable
- enter the MIDI Test mode: while pressing the [SONG], [PATT] and [>>] buttons, turn the [POWER] switch on, select test #7

2. Test if the ports of the MIDI interface connected to the PC works as expected.
3. Test if the sequencer transmits/receives MIDI data to/from the computer using a MIDI software other than QY Data Filer.
4. If all tests above pass, then pls continue;-)
5. Open the QY Data Filer and set the correct MIDI IN/OUT ports in the Device Setup.
6. Close the program and re-install by selecting Repair.
7. Open the QY Data Filer and e.g. Send SMF to QY70.

Hope it works for you!