I don’t have the QY 700 in front of me right now but there are two possibilities I think:
?
1) The sending device could specify a channel above 48. ?On the QY70/100 (with it’s 16 song channels and 8 pattern channels) data would need to be sent on channels 17 thru 24 but alot of MIDI equipment can’t send data over those channels, which is why the QY70 has the utility option of setting channels 1 to 8 or 9 to 16 as pattern channels. ?The QY700 might have a similar feature. ?If it does then it would be located in the utility menu section.
2) If I recall correctly, again on the QY70/100, the routing of the channels to the tracks switches depending on what mode the QY is in. ?So if you go into pattern mode, the QY won’t reroute the data to the song’s tracks. ?Of course this is not to helpful if you want to use both song and pattern tracks.
Again, the above us from memory (and from the QY70/100, so I could be remembering incorrectly. ?
Let me/us know if either works for you.
EDIT/UPDATE: ?Sorry, I might be confusing tracks and channels here, it’s been a while since I was knee-deep in sysex protocols. ;-) ? However, the above ideas could still work, just the names (channels vs. tracks) have simply been changed to protect the innocent, lol!
--
“The longest journey starts with the first step." ?- Lao Tzu
Eric