开云体育

PRACUTIONS AND TIPS BEFORE RE SWITCHING ON

raj juggapah All Messages By This Member #20990 Dear All World Class Musicians Owners of DX7 I have one DX7 Keyboard that was off the power grid for more than 5 years. Switched On all functions appear normally on the screen Sound ....none ......is it the battery ofr anything else, [pls help. Else the unit is physically perfect solid state . Please advise on precautions and tips to make it work like in the 80's . Many Thanks to all of you, With kind regards, Raj? Mauritius On Thursday, April 18, 2024 at 05:38:16 AM GMT+4, Daniel Forró via groups.io <danforcz@...> wrote: Yes, this is general fact. But I suppose he wants to know the relation between DX7 parameter value and BPM, Hz, msec. Here is a table… Daniel Forró toggle quoted message Show quoted text On Apr 18, 2024, at 6:57, LarryS <vision1@...> wrote: LFO is measured in cycles per second (Hz). 60 seconds in a minute, so: One? cycle per second (Hz) = 60 BPM Therefore LFO x 60 = BPM BPM/60 = LFO Hz 120BPM/60 = 2hz? ? ? ? From:?YamahaDX@groups.io?[mailto:YamahaDX@groups.io]?On Behalf Of?josechobernabe@... Sent:?Wednesday, April 17, 2024 2:40 AM To:?Martin Tarenskeen;?YamahaDX@groups.io Subject:?Re: [YamahaDX] LFO Speed in BPM and some LFO tricks ? Hi Martin, I can not find the file with the LFO speed BPM relation. Would it be possible to re send it or send a link or something? It would be really helpful. Thanks a lot in advance!!?
Brian All Messages By This Member #20992 开云体育 Hi Raj, it won't be the battery I think or you'd have lost all your patches. Try headphones first than maybe check a patch to make sure the operators aren't set to 0 output. Brian. toggle quoted message Show quoted text From: YamahaDX@groups.io <YamahaDX@groups.io> on behalf of raj juggapah via groups.io <rajdata01@...> Sent: Thursday, April 18, 2024 3:08 PM To: yamahadx@groups.io <yamahadx@groups.io>; LarryS <vision1@...>; danforcz@... <danforcz@...> Subject: Re: [YamahaDX] PRACUTIONS AND TIPS BEFORE RE SWITCHING ON ? Dear All World Class Musicians Owners of DX7 I have one DX7 Keyboard that was off the power grid for more than 5 years. Switched On all functions appear normally on the screen Sound ....none ......is it the battery ofr anything else, [pls help. Else the unit is physically perfect solid state . Please advise on precautions and tips to make it work like in the 80's . Many Thanks to all of you, With kind regards, Raj? Mauritius On Thursday, April 18, 2024 at 05:38:16 AM GMT+4, Daniel Forró via groups.io <danforcz@...> wrote: Yes, this is general fact. But I suppose he wants to know the relation between DX7 parameter value and BPM, Hz, msec. Here is a table… Daniel Forró On Apr 18, 2024, at 6:57, LarryS <vision1@...> wrote: LFO is measured in cycles per second (Hz). 60 seconds in a minute, so: One? cycle per second (Hz) = 60 BPM Therefore LFO x 60 = BPM BPM/60 = LFO Hz 120BPM/60 = 2hz? ? ? ? From:?YamahaDX@groups.io?[mailto:YamahaDX@groups.io]?On Behalf Of?josechobernabe@... Sent:?Wednesday, April 17, 2024 2:40 AM To:?Martin Tarenskeen;?YamahaDX@groups.io Subject:?Re: [YamahaDX] LFO Speed in BPM and some LFO tricks ? Hi Martin, I can not find the file with the LFO speed BPM relation. Would it be possible to re send it or send a link or something? It would be really helpful. Thanks a lot in advance!!?
Florian Anwander All Messages By This Member #20993 开云体育 Hello Raj, does the init-Sound work? Regards Florian Am 18.04.24 um 07:08 schrieb raj juggapah via groups.io: toggle quoted message Show quoted text Dear All World Class Musicians Owners of DX7 I have one DX7 Keyboard that was off the power grid for more than 5 years. Switched On all functions appear normally on the screen Sound ....none ......is it the battery ofr anything else, [pls help. Else the unit is physically perfect solid state . Please advise on precautions and tips to make it work like in the 80's . Many Thanks to all of you, With kind regards, Raj? Mauritius
raj juggapah All Messages By This Member #20996 Hi Florian? No Kind regards Raj On Thursday, April 18, 2024 at 11:09:47 AM GMT+4, Florian Anwander <fanwander@...> wrote: Hello Raj, does the init-Sound work? Regards Florian Am 18.04.24 um 07:08 schrieb raj juggapah via groups.io: Dear All World Class Musicians Owners of DX7 I have one DX7 Keyboard that was off the power grid for more than 5 years. Switched On all functions appear normally on the screen Sound ....none ......is it the battery ofr anything else, [pls help. Else the unit is physically perfect solid state . Please advise on precautions and tips to make it work like in the 80's . Many Thanks to all of you, With kind regards, Raj? Mauritius
raj juggapah All Messages By This Member #20997 Hi Brian In case patches lost , pls advise how to recover? Kind regards Raj Ps I will try head ph and keep you posted On Thursday, April 18, 2024 at 10:26:16 AM GMT+4, Brian Tolson <briantolson@...> wrote: Hi Raj, it won't be the battery I think or you'd have lost all your patches. Try headphones first than maybe check a patch to make sure the operators aren't set to 0 output. Brian. toggle quoted message Show quoted text From: YamahaDX@groups.io <YamahaDX@groups.io> on behalf of raj juggapah via groups.io <rajdata01@...> Sent: Thursday, April 18, 2024 3:08 PM To: yamahadx@groups.io <yamahadx@groups.io>; LarryS <vision1@...>; danforcz@... <danforcz@...> Subject: Re: [YamahaDX] PRACUTIONS AND TIPS BEFORE RE SWITCHING ON ? Dear All World Class Musicians Owners of DX7 I have one DX7 Keyboard that was off the power grid for more than 5 years. Switched On all functions appear normally on the screen Sound ....none ......is it the battery ofr anything else, [pls help. Else the unit is physically perfect solid state . Please advise on precautions and tips to make it work like in the 80's . Many Thanks to all of you, With kind regards, Raj? Mauritius On Thursday, April 18, 2024 at 05:38:16 AM GMT+4, Daniel Forró via groups.io <danforcz@...> wrote: Yes, this is general fact. But I suppose he wants to know the relation between DX7 parameter value and BPM, Hz, msec. Here is a table… Daniel Forró On Apr 18, 2024, at 6:57, LarryS <vision1@...> wrote: LFO is measured in cycles per second (Hz). 60 seconds in a minute, so: One? cycle per second (Hz) = 60 BPM Therefore LFO x 60 = BPM BPM/60 = LFO Hz 120BPM/60 = 2hz? ? ? ? From:?YamahaDX@groups.io?[mailto:YamahaDX@groups.io]?On Behalf Of?josechobernabe@... Sent:?Wednesday, April 17, 2024 2:40 AM To:?Martin Tarenskeen;?YamahaDX@groups.io Subject:?Re: [YamahaDX] LFO Speed in BPM and some LFO tricks ? Hi Martin, I can not find the file with the LFO speed BPM relation. Would it be possible to re send it or send a link or something? It would be really helpful. Thanks a lot in advance!!?
Florian Anwander All Messages By This Member #20998 开云体育 Hello Raj,? then the issue is NOT(!) the patches lost. And quite likely it is not the battery. Since you seem to be from Mauritius my first suspicion is based on the the sea climate: corroded jacks and/or a corroded volume slider. Kind regards Florian On 18.04.24 13:28, raj juggapah via groups.io wrote: toggle quoted message Show quoted text Hi Florian? No Kind regards Raj On Thursday, April 18, 2024 at 11:09:47 AM GMT+4, Florian Anwander <fanwander@...> wrote: Hello Raj, does the init-Sound work? Regards Florian Am 18.04.24 um 07:08 schrieb raj juggapah via groups.io: Dear All World Class Musicians Owners of DX7 I have one DX7 Keyboard that was off the power grid for more than 5 years. Switched On all functions appear normally on the screen Sound ....none ......is it the battery ofr anything else, [pls help. Else the unit is physically perfect solid state . Please advise on precautions and tips to make it work like in the 80's . Many Thanks to all of you, With kind regards, Raj? Mauritius
raj juggapah All Messages By This Member #20999 Hi Flo That may be possible How to clean? KR Raj On Thursday, April 18, 2024 at 03:44:29 PM GMT+4, Florian Anwander <fanwander@...> wrote: Hello Raj,? then the issue is NOT(!) the patches lost. And quite likely it is not the battery. Since you seem to be from Mauritius my first suspicion is based on the the sea climate: corroded jacks and/or a corroded volume slider. Kind regards Florian On 18.04.24 13:28, raj juggapah via groups.io wrote: Hi Florian? No Kind regards Raj On Thursday, April 18, 2024 at 11:09:47 AM GMT+4, Florian Anwander <fanwander@...> wrote: Hello Raj, does the init-Sound work? Regards Florian Am 18.04.24 um 07:08 schrieb raj juggapah via groups.io: Dear All World Class Musicians Owners of DX7 I have one DX7 Keyboard that was off the power grid for more than 5 years. Switched On all functions appear normally on the screen Sound ....none ......is it the battery ofr anything else, [pls help. Else the unit is physically perfect solid state . Please advise on precautions and tips to make it work like in the 80's . Many Thanks to all of you, With kind regards, Raj? Mauritius
Florian Anwander All Messages By This Member #21000 开云体育 Before you start cleaning, check with an oscilloscope or an audio probe, whether there is sound at the input of the volume potentiometer. On 18.04.24 13:47, raj juggapah wrote: toggle quoted message Show quoted text Hi Flo That may be possible How to clean? KR Raj On Thursday, April 18, 2024 at 03:44:29 PM GMT+4, Florian Anwander <fanwander@...> wrote: Hello Raj,? then the issue is NOT(!) the patches lost. And quite likely it is not the battery. Since you seem to be from Mauritius my first suspicion is based on the the sea climate: corroded jacks and/or a corroded volume slider. Kind regards Florian On 18.04.24 13:28, raj juggapah via groups.io wrote: Hi Florian? No Kind regards Raj On Thursday, April 18, 2024 at 11:09:47 AM GMT+4, Florian Anwander <fanwander@...> wrote: Hello Raj, does the init-Sound work? Regards Florian Am 18.04.24 um 07:08 schrieb raj juggapah via groups.io: Dear All World Class Musicians Owners of DX7 I have one DX7 Keyboard that was off the power grid for more than 5 years. Switched On all functions appear normally on the screen Sound ....none ......is it the battery ofr anything else, [pls help. Else the unit is physically perfect solid state . Please advise on precautions and tips to make it work like in the 80's . Many Thanks to all of you, With kind regards, Raj? Mauritius
raj juggapah All Messages By This Member #21001 Noted with thanks Flo Will keep all posted Wish you a great day KR Raj On Thursday, April 18, 2024 at 03:56:37 PM GMT+4, Florian Anwander <fanwander@...> wrote: Before you start cleaning, check with an oscilloscope or an audio probe, whether there is sound at the input of the volume potentiometer. On 18.04.24 13:47, raj juggapah wrote: Hi Flo That may be possible How to clean? KR Raj On Thursday, April 18, 2024 at 03:44:29 PM GMT+4, Florian Anwander <fanwander@...> wrote: Hello Raj,? then the issue is NOT(!) the patches lost. And quite likely it is not the battery. Since you seem to be from Mauritius my first suspicion is based on the the sea climate: corroded jacks and/or a corroded volume slider. Kind regards Florian On 18.04.24 13:28, raj juggapah via groups.io wrote: Hi Florian? No Kind regards Raj On Thursday, April 18, 2024 at 11:09:47 AM GMT+4, Florian Anwander <fanwander@...> wrote: Hello Raj, does the init-Sound work? Regards Florian Am 18.04.24 um 07:08 schrieb raj juggapah via groups.io: Dear All World Class Musicians Owners of DX7 I have one DX7 Keyboard that was off the power grid for more than 5 years. Switched On all functions appear normally on the screen Sound ....none ......is it the battery ofr anything else, [pls help. Else the unit is physically perfect solid state . Please advise on precautions and tips to make it work like in the 80's . Many Thanks to all of you, With kind regards, Raj? Mauritius
googdyamaha All Messages By This Member #21005 A few days ago I wanted to lower the temperature of the rectifier but it was too hot for me to touch it, so I thought I could put a cooling fan on the vacant C6 socket, as I don't know the voltage very well the fan spun quite fast causing me to be a bit scared, after 1 second it stopped spinning, when I connected the fan again the fan stopped responding ........ Finally, I noticed that the relay no longer sounded when I turned it on and the buttons were silent. I thought the relay had burned out, so I violently removed the cover of the relay with pliers, but then I suddenly realized that the two 0.75A fuses on the DC power board had blown. I replaced the fuses and everything was back to normal. Now my relay has no cover and the cover is damaged. You can check the fuses. Den tors 18 apr. 2024 kl 13:08 skrev raj juggapah via <rajdata01=yahoo.com@groups.io>: toggle quoted message Show quoted text Dear All World Class Musicians Owners of DX7 I have one DX7 Keyboard that was off the power grid for more than 5 years. Switched On all functions appear normally on the screen Sound ....none ......is it the battery ofr anything else, [pls help. Else the unit is physically perfect solid state . Please advise on precautions and tips to make it work like in the 80's . Many Thanks to all of you, With kind regards, Raj? Mauritius On Thursday, April 18, 2024 at 05:38:16 AM GMT+4, Daniel Forró via <danforcz=yahoo.com@groups.io> wrote: Yes, this is general fact. But I suppose he wants to know the relation between DX7 parameter value and BPM, Hz, msec. Here is a table… Daniel Forró On Apr 18, 2024, at 6:57, LarryS <vision1@...> wrote: LFO is measured in cycles per second (Hz). 60 seconds in a minute, so: One? cycle per second (Hz) = 60 BPM Therefore LFO x 60 = BPM BPM/60 = LFO Hz 120BPM/60 = 2hz? ? ? ? From:?YamahaDX@groups.io?[mailto:YamahaDX@groups.io]?On Behalf Of?josechobernabe@... Sent:?Wednesday, April 17, 2024 2:40 AM To:?Martin Tarenskeen;?YamahaDX@groups.io Subject:?Re: [YamahaDX] LFO Speed in BPM and some LFO tricks ? Hi Martin, I can not find the file with the LFO speed BPM relation. Would it be possible to re send it or send a link or something? It would be really helpful. Thanks a lot in advance!!?
midihooker666 All Messages By This Member #21006 No it's not the battery. The battery is only there to be able to save sounds. It can be alot of things. Faulty outputs etc. Have you tried the headphone output? toggle quoted message Show quoted text On Fri, 19 Apr 2024, 15:42 googdyamaha via , <valerizimlichxxc21=gmail.com@groups.io> wrote: A few days ago I wanted to lower the temperature of the rectifier but it was too hot for me to touch it, so I thought I could put a cooling fan on the vacant C6 socket, as I don't know the voltage very well the fan spun quite fast causing me to be a bit scared, after 1 second it stopped spinning, when I connected the fan again the fan stopped responding ........ Finally, I noticed that the relay no longer sounded when I turned it on and the buttons were silent. I thought the relay had burned out, so I violently removed the cover of the relay with pliers, but then I suddenly realized that the two 0.75A fuses on the DC power board had blown. I replaced the fuses and everything was back to normal. Now my relay has no cover and the cover is damaged. You can check the fuses. Den tors 18 apr. 2024 kl 13:08 skrev raj juggapah via <rajdata01=yahoo.com@groups.io>: Dear All World Class Musicians Owners of DX7 I have one DX7 Keyboard that was off the power grid for more than 5 years. Switched On all functions appear normally on the screen Sound ....none ......is it the battery ofr anything else, [pls help. Else the unit is physically perfect solid state . Please advise on precautions and tips to make it work like in the 80's . Many Thanks to all of you, With kind regards, Raj? Mauritius On Thursday, April 18, 2024 at 05:38:16 AM GMT+4, Daniel Forró via <danforcz=yahoo.com@groups.io> wrote: Yes, this is general fact. But I suppose he wants to know the relation between DX7 parameter value and BPM, Hz, msec. Here is a table… Daniel Forró On Apr 18, 2024, at 6:57, LarryS <vision1@...> wrote: LFO is measured in cycles per second (Hz). 60 seconds in a minute, so: One? cycle per second (Hz) = 60 BPM Therefore LFO x 60 = BPM BPM/60 = LFO Hz 120BPM/60 = 2hz? ? ? ? From:?YamahaDX@groups.io?[mailto:YamahaDX@groups.io]?On Behalf Of?josechobernabe@... Sent:?Wednesday, April 17, 2024 2:40 AM To:?Martin Tarenskeen;?YamahaDX@groups.io Subject:?Re: [YamahaDX] LFO Speed in BPM and some LFO tricks ? Hi Martin, I can not find the file with the LFO speed BPM relation. Would it be possible to re send it or send a link or something? It would be really helpful. Thanks a lot in advance!!?
googdyamaha All Messages By This Member #21007 My yamaha tx7 has a small amount of leakage from all devices when I turn it on and when I turn the tx7 off, the leakage goes away. What is causing this and can any experts explain? (There is nothing unusual about the tx7, the only problem is just a little leakage) I have no problems with my home circuits. ?
Florian Anwander All Messages By This Member #21009 开云体育 Hello What do you mean with "Leakage from all devices"? Some noise or some physical fluid? btw: If English is not your native language, then write your question in detail in your own language and have it translated into English by deepl.com Florian Am 02.05.24 um 08:12 schrieb googdyamaha: toggle quoted message Show quoted text My yamaha tx7 has a small amount of leakage from all devices when I turn it on and when I turn the tx7 off, the leakage goes away. What is causing this and can any experts explain? (There is nothing unusual about the tx7, the only problem is just a little leakage) I have no problems with my home circuits. ?
googdyamaha All Messages By This Member #21010 Sorry sir，English is really not my native language.? When I turn on the power switch on the 1080, I can feel a slight electric sensation when I go to touch the 1080 and other devices. I can confirm that the problem is caused by my jv1080, but I don't know what causes it! torsdag 2 maj 2024 skrev Florian Anwander via <fanwander=mnet-online.de@groups.io>: toggle quoted message Show quoted text Hello What do you mean with "Leakage from all devices"? Some noise or some physical fluid? btw: If English is not your native language, then write your question in detail in your own language and have it translated into English by Florian Am 02.05.24 um 08:12 schrieb googdyamaha: My yamaha tx7 has a small amount of leakage from all devices when I turn it on and when I turn the tx7 off, the leakage goes away. What is causing this and can any experts explain? (There is nothing unusual about the tx7, the only problem is just a little leakage) I have no problems with my home circuits. ?
googdyamaha All Messages By This Member #21011 When I turn on the power switch on the tx7, I can feel a slight electric sensation when I go to touch the tx7 and other devices. I can confirm that the problem is caused by my tx7, but I don't know what causes it! Sorry，It's not 1080, it's tx7. torsdag 2 maj 2024 skrev googdyamaha via <valerizimlichxxc21=gmail.com@groups.io>: toggle quoted message Show quoted text Sorry sir，English is really not my native language.? When I turn on the power switch on the 1080, I can feel a slight electric sensation when I go to touch the 1080 and other devices. I can confirm that the problem is caused by my jv1080, but I don't know what causes it! torsdag 2 maj 2024 skrev Florian Anwander via <fanwander=mnet-online.de@groups.io>: Hello What do you mean with "Leakage from all devices"? Some noise or some physical fluid? btw: If English is not your native language, then write your question in detail in your own language and have it translated into English by Florian Am 02.05.24 um 08:12 schrieb googdyamaha: My yamaha tx7 has a small amount of leakage from all devices when I turn it on and when I turn the tx7 off, the leakage goes away. What is causing this and can any experts explain? (There is nothing unusual about the tx7, the only problem is just a little leakage) I have no problems with my home circuits. ?
Florian Anwander All Messages By This Member #21012 开云体育 Hello Valeri, most of us are not native english speakers assumingly, so no problem with that. Does it happen also, when you have nothing connected to the TX7 (no audio, no MIDI)? If yes, then this is most likely an issue with your electrical mains installation, and not an issue of the TX7 oder other gear. If it happens only when the TX7 is connected to other gear (either by an audio cable or a MIDI cable), then the security issue quite likely is at the other gear. This might be a real life endangering thing. So be very careful! Florian Am 02.05.24 um 12:06 schrieb C十: toggle quoted message Show quoted text Sorry sir，English is really not my native language.? When I turn on the power switch on the 1080, I can feel a slight electric sensation when I go to touch the 1080 and other devices. I can confirm that the problem is caused by my jv1080, but I don't know what causes it! torsdag 2 maj 2024 skrev Florian Anwander via <fanwander=mnet-online.de@groups.io>: Hello What do you mean with "Leakage from all devices"? Some noise or some physical fluid? btw: If English is not your native language, then write your question in detail in your own language and have it translated into English by Florian Am 02.05.24 um 08:12 schrieb googdyamaha: My yamaha tx7 has a small amount of leakage from all devices when I turn it on and when I turn the tx7 off, the leakage goes away. What is causing this and can any experts explain? (There is nothing unusual about the tx7, the only problem is just a little leakage) I have no problems with my home circuits. ?

Previous Topic Next Topic