Hello Valeri,
most of us are not native english speakers assumingly, so no
problem with that.
Does it happen also, when you have nothing connected to the TX7
(no audio, no MIDI)?
If yes, then this is most likely an issue with your electrical
mains installation, and not an issue of the TX7 oder other gear.
If it happens only when the TX7 is connected to other gear (either
by an audio cable or a MIDI cable), then the security issue quite
likely is at the other gear.
This might be a real life endangering thing. So be very careful!
Florian
Am 02.05.24 um 12:06 schrieb C十:
toggle quoted message
Show quoted text
Sorry sir，English is really not my native language.?
When I turn on the power switch on the 1080, I can feel a
slight electric sensation when I go to touch the 1080 and other
devices. I can confirm that the problem is caused by my jv1080,
but I don't know what causes it!
torsdag 2 maj 2024 skrev Florian Anwander via
<fanwander=
[email protected]>:
Hello
What do you mean with "Leakage from all devices"? Some
noise or some physical fluid?
btw: If English is not your native language, then write
your question in detail in your own language and have it
translated into English by
Florian
Am 02.05.24 um 08:12 schrieb googdyamaha:
My
yamaha tx7 has a small amount of leakage from all
devices when I turn it on and when I turn the tx7
off, the leakage goes away. What is causing this and
can any experts explain? (There is nothing unusual
about the tx7, the only problem is just a little
leakage) I have no problems with my home circuits.
?
