Rack mount has nice analog delay, chorus, slide adjust EQ, and Compressor, can used singly or as groups. Nice cosmetic condition 100% functional. I have original foot control unit, has on/off for all functions and a lot of cable. Direct power - no wall wart

$200 plus shipping

call 218-384-9857 or e-mail

thx

Paul
_________________________________________________________________
Get your FREE download of MSN Explorer at

The MX-8 is a rack mount programmable MIDI patch bay. Includes instruction manual. Cosmetically good some rack wear, 100% functional
$60 plus shipping

The MX-28s is separate MIDI patch box with 2 inputs and 8 manual selectable outs, wall wart power supply included. Still in box with instructions $60 plus shipping

Take both for $125 including shipping and I'll throw in a couple MIDI cables

thx

Paul
_________________________________________________________________
Get your FREE download of MSN Explorer at

MKS-30 Planet S 100% functional, minor rack wear, with instruction manual, also PG-200 programmer with case and cable. Includes a M-16C memory cartridge $300 plus shipping. Prefer to sell as package but will consider offers

call 218-384-9857 or e-mail

thx

Paul
_________________________________________________________________
Get your FREE download of MSN Explorer at

Very good cosmetic, 100% functional Have Instruction manual
All membranes switch work good

$375 plus shipping

call 218-384-9857 or e-mail

thx

Paul
_________________________________________________________________
Get your FREE download of MSN Explorer at

In message <3B1C5FA0.1A6E20F4@...>, mango <j.kolling@...>
writes

haven't tried them yet, but i thought i'd forward it to the list anyway.

Another mindless windup. Don't people have anything better to do with
their time than create useless web pages
--
Richard F

haven't tried them yet, but i thought i'd forward it to the list anyway.

Hi,

At 22:46 03.06.01 -0500, you wrote:

Summa wrote:

Hi,

howdy

Teklab had some problems lately you may should try it again know, since it
seems they have reinitialised the mailing list... almost all list memeber
got an unsubscription message even so they're still subscribed...

I still get a failure notice:

from MAILER-DAEMON@...

They may still have problems, try to mail to Jay Vaughan <jay@...>
hopefully he answer you mail, unless it gets lost in the phile of other
mails caused by the un - resubsciption of all the list users.

When you don't want to convert 4OP sounds, you mostly don't need very
complex algorithms with the FS1R, because of the overtone rich operator
waveforms you hardly need more then 2 or 3 operators in a row, to create
interesting sounds...

Yeah, it seems like there is endless possibilities coming up with new and
interesting sounds on the FS1R.
My problem is I'm not very knowledgeable about FM synthesis, I usually find a
voice I like and use the editor going through different algorithms, change the
operator waveforms, mess around with the filter ect...
I find that most of the time it sounds great the way it is especially when you
tweak the FM and Format knobs.

last year I uploaded my first 33 patches, mostly try outs, bt maybe they're
of use for you...

set up DX100 patches but I guess this is a little more complicated then I
thought.

I don't know an easy way ... have you programmed those DX100 patches
yourself or do you need those sounds for older tracks... Maybe someone knows
a way to convert 4Op sounds into DX7 patches that can be loaded diretly into
the FS1R...

I want that DX100 bass sound, like you hear in older Detroit techno.
A simple 4OP simulation would be satisfactory, I really dont want to go out and
buy a DX100.

Ahhh, I guess it's the "LateylyBass", I heard of it, and have a version of
that sound in the presets of my TX81z, but I'm not sure if it sounds exactly
like the DX100 Version, since it uses the additional TX waveforms... If it's
the only sound you need I'll see if I find the time converting it to the
FS1R... I never done a conversion but it isn't a very complex sound so
shouldn't be too hard... I could also programm the formant and FM knobs to
add some realtime control...
But maybe someone already converted it to the DX7, it seems to be a famous
4OP sound, have you checked all the avaiable libs...
Btw. have you tried all the bass presets in the DX voice banks F65 till G39,
I think some of them come at least close to the LatelyBass and would be a
good start for to reprogramm that sound for the FS1R...

Summa


+
+
+ /&#92; /&#92;
/&#92; + /&#92;/ &#92; / &#92;
+++++++/++&#92;++/++++++&#92;++/+++ &#92; /&#92; /&#92; / O
/ &#92;/ &#92;/ &#92; / &#92;/ &#92; | | / | /----
/&#92; / + &#92;/ &#92;&#92;---/ ---- | |
/ &#92;/ + /&#92; / &#92;----
+ / &#92; /
+ Nicknames : Summa or SumGhost
+ AIM : Flotorian
+ Born : 1967
+ Profession : Student of Computer Science
+

A Touch of Future - Project :
Casio CZ Synth Station :

Boycott the Premium Artist Service!!!


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at

Summa wrote:

Hi,

howdy

Teklab had some problems lately you may should try it again know, since it
seems they have reinitialised the mailing list... almost all list memeber
got an unsubscription message even so they're still subscribed...

I still get a failure notice:

from MAILER-DAEMON@...

<fss-list-subscribe@...>:
Sorry, no mailbox here by that name. (#5.1.1)

Summa wrote:

When you don't want to convert 4OP sounds, you mostly don't need very
complex algorithms with the FS1R, because of the overtone rich operator
waveforms you hardly need more then 2 or 3 operators in a row, to create
interesting sounds...

Yeah, it seems like there is endless possibilities coming up with new and
interesting sounds on the FS1R.
My problem is I'm not very knowledgeable about FM synthesis, I usually find a
voice I like and use the editor going through different algorithms, change the
operator waveforms, mess around with the filter ect...
I find that most of the time it sounds great the way it is especially when you
tweak the FM and Format knobs.

set up DX100 patches but I guess this is a little more complicated then I
thought.

I don't know an easy way ... have you programmed those DX100 patches
yourself or do you need those sounds for older tracks... Maybe someone knows
a way to convert 4Op sounds into DX7 patches that can be loaded diretly into
the FS1R...

I want that DX100 bass sound, like you hear in older Detroit techno.
A simple 4OP simulation would be satisfactory, I really dont want to go out and
buy a DX100.

Stephen

Hi all

I've just bought a faulty DX7IID that according to a 'pro' shop was
going to cost ?200Uk for a new board, and I've repaired it down to
component level for under ?1UK!!. So much for engineers in shops!

Anyway, what I need to know is, does the DX7IID need different voices
from the DX7 as I believe there were changes/additions made to the
machine.

Also, what is the latest version of software and how can I tell what's
in mine (anyone know the problems/improvements in the different
versions)

I've tried to access Dave Bensons DX7 web site but all it wants to do is
download as a file.
--
Richard F

Hi,

At 03:45 02.06.01 -0500, you wrote:

Summa wrote:

The FS1R mailing List at Teklab had a lot of discussions and ideas about
converting 4OP FM patches to the FS1R, thats why Atom included that into his
page.

I get no response when I send email to: fss-list-unsubscribe@...
Maybe i should try sending Atom email.

Teklab had some problems lately you may should try it again know, since it
seems they have reinitialised the mailing list... almost all list memeber
got an unsubscription message even so they're still subscribed...

A carrier is/are the operator(s) of an algorithm you can hear, all the other
operators are modulators that you can't hear directly, you only hear the
modulators inlfuence on the carrier ...

So if you look at algorithm # 1 of the FS1R you have only carriers, take
algorithm #66 the operator 8 is the carrier, the rest are modulators.
Another example is algorithm # 72 where operator 8 and 4 are carriers and as
always the rest are modulators...

So to recreate a 4OP DX100 patch I would only use 4 OP's with three in Key
Sync, set on Sine, OP level at 99, and the fourth OP would be used as the
carrier?
How do you set the fourth OP to be the carrier?

By chosing the right algorithm like #77 that should be comparable with #5 of
a 4 Op FM synth... anyway, if the maximum volume of the 4OP modulator you
emulate isn't too high, you sometimes only need 2 or even one modulator
instead of all three. It depends on the sound you want to convert...

If you need more informations you'd better join the FS1R mailing list, since
I'm not a specialist in converting 4Op -> 8Op. I'm using my TX81z when I
want to use my 4Op sounds, use the FS1R for my new ones.

I hope that helps a bit!

hmmm... I'm still a bit confused but I'll try looking over the various
algorithms, #77 sounds like a good place to start.
I was kinda hoping someone familiar with the FS1R editor knew of an easy

way to >

When you don't want to convert 4OP sounds, you mostly don't need very
complex algorithms with the FS1R, because of the overtone rich operator
waveforms you hardly need more then 2 or 3 operators in a row, to create
interesting sounds...

set up DX100 patches but I guess this is a little more complicated then I
thought.

I don't know an easy way ... have you programmed those DX100 patches
yourself or do you need those sounds for older tracks... Maybe someone knows
a way to convert 4Op sounds into DX7 patches that can be loaded diretly into
the FS1R...


Summa



+
+
+ /&#92; /&#92;
/&#92; + /&#92;/ &#92; / &#92;
+++++++/++&#92;++/++++++&#92;++/+++ &#92; /&#92; /&#92; / O
/ &#92;/ &#92;/ &#92; / &#92;/ &#92; | | / | /----
/&#92; / + &#92;/ &#92;&#92;---/ ---- | |
/ &#92;/ + /&#92; / &#92;----
+ / &#92; /
+ Nicknames : Summa or SumGhost
+ AIM : Flotorian
+ Born : 1967
+ Profession : Student of Computer Science
+

A Touch of Future - Project :
Casio CZ Synth Station :

Boycott the Premium Artist Service!!!


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at

make that I get no response when I send email to: fss-list-subscribe@...

stephen wrote:

Summa wrote:

The FS1R mailing List at Teklab had a lot of discussions and ideas about
converting 4OP FM patches to the FS1R, thats why Atom included that into his
page.

I get no response when I send email to: fss-list-unsubscribe@...
Maybe i should try sending Atom email.

A carrier is/are the operator(s) of an algorithm you can hear, all the other
operators are modulators that you can't hear directly, you only hear the
modulators inlfuence on the carrier ...

So if you look at algorithm # 1 of the FS1R you have only carriers, take
algorithm #66 the operator 8 is the carrier, the rest are modulators.
Another example is algorithm # 72 where operator 8 and 4 are carriers and as
always the rest are modulators...

So to recreate a 4OP DX100 patch I would only use 4 OP's with three in Key
Sync, set on Sine, OP level at 99, and the fourth OP would be used as the
carrier?
How do you set the fourth OP to be the carrier?

By chosing the right algorithm like #77 that should be comparable with #5 of
a 4 Op FM synth... anyway, if the maximum volume of the 4OP modulator you
emulate isn't too high, you sometimes only need 2 or even one modulator
instead of all three. It depends on the sound you want to convert...

If you need more informations you'd better join the FS1R mailing list, since
I'm not a specialist in converting 4Op -> 8Op. I'm using my TX81z when I
want to use my 4Op sounds, use the FS1R for my new ones.

I hope that helps a bit!

hmmm... I'm still a bit confused but I'll try looking over the various algorithms,
#77 sounds like a good place to start.
I was kinda hoping someone familiar with the FS1R editor knew of an easy way to set
up DX100 patches but I guess this is a little more complicated then I thought.

thanks,
Stephen.

Hi Stephen,

At 02:22 01.06.01 -0500, you wrote:

Summa wrote:

For more links and Tips take a look at Atoms "-UNOFFICIAL- Yamaha FS1R"

Page...

Thanks for the links!
Looks like Atom Smashers page has the info I'm looking for:
(Getting 'Harsh' Sounds Out Of The
FS1R)
I may not be able to load DX100 patches into the FS1R but you can emulate

the 4OP

DX sound.

The FS1R mailing List at Teklab had a lot of discussions and ideas about
converting 4OP FM patches to the FS1R, thats why Atom included that into his
page.

I tired doing this using the FS1R editor for the Mac but I'm a bit confused by
what he means by 'carrier'.

A carrier is/are the operator(s) of an algorithm you can hear, all the other
operators are modulators that you can't hear directly, you only hear the
modulators inlfuence on the carrier ...

So if you look at algorithm # 1 of the FS1R you have only carriers, take
algorithm #66 the operator 8 is the carrier, the rest are modulators.
Another example is algorithm # 72 where operator 8 and 4 are carriers and as
always the rest are modulators...

So to recreate a 4OP DX100 patch I would only use 4 OP's with three in Key
Sync, set on Sine, OP level at 99, and the fourth OP would be used as the
carrier?
How do you set the fourth OP to be the carrier?

By chosing the right algorithm like #77 that should be comparable with #5 of
a 4 Op FM synth... anyway, if the maximum volume of the 4OP modulator you
emulate isn't too high, you sometimes only need 2 or even one modulator
instead of all three. It depends on the sound you want to convert...

If you need more informations you'd better join the FS1R mailing list, since
I'm not a specialist in converting 4Op -> 8Op. I'm using my TX81z when I
want to use my 4Op sounds, use the FS1R for my new ones.

I hope that helps a bit!

Summa





+
+
+ /&#92; /&#92;
/&#92; + /&#92;/ &#92; / &#92;
+++++++/++&#92;++/++++++&#92;++/+++ &#92; /&#92; /&#92; / O
/ &#92;/ &#92;/ &#92; / &#92;/ &#92; | | / | /----
/&#92; / + &#92;/ &#92;&#92;---/ ---- | |
/ &#92;/ + /&#92; / &#92;----
+ / &#92; /
+ Nicknames : Summa or SumGhost
+ AIM : Flotorian
+ Born : 1967
+ Profession : Student of Computer Science
+

A Touch of Future - Project :
Casio CZ Synth Station :

Boycott the Premium Artist Service!!!


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at

Summa wrote:

For more links and Tips take a look at Atoms "-UNOFFICIAL- Yamaha FS1R" Page...

Thanks for the links!
Looks like Atom Smashers page has the info I'm looking for:
(Getting 'Harsh' Sounds Out Of The
FS1R)
I may not be able to load DX100 patches into the FS1R but you can emulate the 4OP
DX sound.

I tired doing this using the FS1R editor for the Mac but I'm a bit confused by
what he means by 'carrier'.
In the FS1R editor I'll open up the voice editor and go to the OSC menu which
shows 8 OP's.
So to recreate a 4OP DX100 patch I would only use 4 OP's with three in Key Sync,
set on Sine, OP level at 99, and the fourth OP would be used as the carrier?
How do you set the fourth OP to be the carrier?

Stephen.

This link is ok!



see now! and download more 10,000 sounds for your DX7 synth.

see more in this page!

any questions, send your e-mail to:

jezreel7@...

In message <3B139286.4854FEB7@...>, stephen <stephen@...>
writes

Hi, I'm new to the YamhaDX list.
I want to load DX100 patches into my FS1R.
I know this is possible via sysex.

It isn't possible. You can only load DX7 voices.
--
Richard F

Hi Stephen,

the FS1R is only accepting DX7 patches and only single Voice dumps, no
Banks. The 4OP FM synts like DX100, DX9, DX21, TX81z ... are not directly
supported...
I guess this is because the 4OP synths modulators have a higher modulation
index (what can be emulated) and the LFO of those synths are also faster
then the FS1R and the DX7 ones...

Btw. there's also a FS1R list on yahoogroups and a bigger one on
www.teklab.com...



For subsciption mail to...

fss-list-subscribe@...

For more links and Tips take a look at Atoms "-UNOFFICIAL- Yamaha FS1R" Page...



Summa


At 07:13 29.05.01 -0500, you wrote:

Hi, I'm new to the YamhaDX list.
I want to load DX100 patches into my FS1R.
I know this is possible via sysex.

Two problems:

#1. Where do I get DX100 patches on the internet?

#2. I'm not familiar with sysex dumps, I'm on a Mac platform.

I have the FS1R editor for the Mac, I also have DX7 Librarian 1.2.6 for
the DX7II FD.
If there is software that would aid me in loading patches from other DX
synths please let me know.

Thanks,
Stephen.




Your use of Yahoo! Groups is subject to

+
+
+ /&#92; /&#92;
/&#92; + /&#92;/ &#92; / &#92;
+++++++/++&#92;++/++++++&#92;++/+++ &#92; /&#92; /&#92; / O
/ &#92;/ &#92;/ &#92; / &#92;/ &#92; | | / | /----
/&#92; / + &#92;/ &#92;&#92;---/ ---- | |
/ &#92;/ + /&#92; / &#92;----
+ / &#92; /
+ Nicknames : Summa or SumGhost
+ AIM : Flotorian
+ Born : 1967
+ Profession : Student of Computer Science
+

A Touch of Future - Project :
Casio CZ Synth Station :

Boycott the Premium Artist Service!!!


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at

Hi, I'm new to the YamhaDX list.
I want to load DX100 patches into my FS1R.
I know this is possible via sysex.

Two problems:

#1. Where do I get DX100 patches on the internet?

#2. I'm not familiar with sysex dumps, I'm on a Mac platform.

I have the FS1R editor for the Mac, I also have DX7 Librarian 1.2.6 for
the DX7II FD.
If there is software that would aid me in loading patches from other DX
synths please let me know.

Thanks,
Stephen.

开云体育

sorry - but for me the unzipping of the downloaded file works just peachy, got them all here! So I guess it must be something else going wrong there!
--

On Sun, 27 May 2001 16:03:41
Miracle Mary-Anne Music wrote:

DEar HC:
I just tried the dx7 files again the "all banks.zip"
I download and then the winzip tells me it's an "invalid archive". It won't
open the zip file.
I tried it a couple of times, any hints.
Sorry for my error.

Best Wishes and thanks for providing the files for us to view.



From: "HC" <hcmetz@...>
To: <YamahaDX@...>
Sent: Sunday, May 27, 2001 11:23 AM
Subject: Re: [YamahaDX] for all members

Hi all,

the download works, if you just go to do a little directory surfing, go to

then click on the two files to donwload and it works (something about the

naming in the pathe of the direct link must have gone wrong)

enjoy

HC

On Fri, 25 May 2001 19:27:51
jezreel7 wrote:

The following page belongs to Jezreel design.


This section is devoted to the technology of synthesis of sound by
means of synthesizers .

The synthesizer YAMAHA DX7,

was an event of the history .

In this page we offer resources to program the synthesizer YAMAHA
DX7,

We provide the better patches designed in the last years (2000,2001)
to an accessible price,

and more of 10000 patches and librarian free as a gentility of
Jezreel design.

Here will find links the better service pages for the synthesizer
YAMAHA DX7.

Get 250 color business cards for FREE!




Your use of Yahoo! Groups is subject to

Get 250 color business cards for FREE!