OK, so here's my deal. I added a bunch of new gear to my home studio,
and I'm looking for a good editor/librarian program (for PC). I've
played around with MIDI Quest 7.0 and Sound Diver a little, but not
thoroughly enough to prefer one over the other. (Although I was
getting slightly better results with Sound Diver.)
I'm using a DX-100 and 2 FB-01's, and having a difficult time getting
everything to work at the same time. If I just hook up one device,
editing is no prob, but all hell breaks loose when I hook 'em all up
together. I thought that all the channels were correct, but I guess
not, if it only recognizes 1 of the FB's. The path was something like
this:
PC MIDI OUT -> FB-01 IN,
FB-01 OUT -> DX-100 IN,
DX-100 OUT -> FB-01 #2 IN,
FB-01 #2 OUT -> PC MIDI IN.
I've tried this several different ways, but this seemed to be the
simplest. (One day at work I spent my lunch hour drawing little
charts. :) When I figure out how to program all this stuff, I plan to
do some live shows, with a QX3 sequencer (which is much easier to set
up).
Any pointers for my programming dilemma? I'm still new to MIDI, so
anything other than RTFM would be helpful. ;)
Thanks in advance,
Scott
