Op za 4 feb. 2023 om 03:39 schreef Daniel Forró via groups.io
<danforcz@...>:
It is not recommended to replace all caps, only the bad ones. Service experts say: If it works, leave it so.
I'm with Daniel on this. I have no trouble replacing capacitors myself
but I don't want to solder and desolder on the board without good
reason.
There are no tantalum capacitors in the TX802. Because it's mostly
digital there are also very few electrolytics. There is no point in me
replacing DC blocking capacitors on the headphone output if there is a
problem in the digital domain. There is one capacitor next to the EGM
which I've already replaced with no result.
