On Tue, 10 Dec 2013, Martin Tarenskeen wrote:
- In the case of for example the FB01 I have reverse-engineered a formula
that produced a table that (almost) matched my measurements.
LFO_freq_Hz = 48. * (2 ^ (1. / 16.)) ^ (i - 250)
the number '48' was the frequency I measured for i=250, where i is in the
range 0 to 255 (8 bits).
P.S. #2:
When setting LFO waveform to S/Hold the FB01 behaves differently from the other DX/TX synths. You have to multiply the value with a factor of 200.
The extremely low frequencies for the low values now become very usable for interesting quasi-sequencer effects.
--
MT
