I have an fc 1000 .... has control head and tuner box ... maybe the protocol
is the same?!?
The control head of the fc1000 needs just 12v and ptt and gives alc back to
the rig for tuning with low power .... the frequency data is only needed if
you use the memory function (presets) but for tuning it is not needed
(so I also could use it with my icom rig *g*)
What data is sent over the data bus from control head to tuning box??? I do
not know .... but that could not be toooo difficult to find that out
Dg9bfc
Sigi
toggle quoted message
Show quoted text
-----Ursprüngliche Nachricht-----
Von: YaesuTuner@... [mailto:YaesuTuner@...] Im
Auftrag von Lou
Gesendet: Donnerstag, 14. Juni 2012 13:13
An: YaesuTuner@...
Betreff: [YaesuTuner] Re: External controller for FC-40
I am looking for the same information. Has anyone reverse engineered the
communications protocol? A web search some people have done it with ICOMs
tuners.
--- In YaesuTuner@... <mailto:YaesuTuner%40yahoogroups.com> ,
"de_w1jp" <w1jp@...> wrote:
Hey all—
Has anyone built and external controller for the FC-40?
If not, what about the protocol that the controller uses?
Thanks,
Jon
w1jp
