And with the spare witrs you can parallel the power wires for lower loss
(depends if needed if you have a long run
For me I used just din connectors and I made my own long cable
Have an fc1000
Dg9bfc
Sigi
Ps I use it also with a 1:4 balun on the outside to tune ladderline fed
antennas
toggle quoted message
Show quoted text
-----Ursprüngliche Nachricht-----
Von: YaesuTuner@... [mailto:YaesuTuner@...] Im
Auftrag von Ron - KE5RON
Gesendet: Sonntag, 19. Juni 2011 00:07
An: YaesuTuner@...
Betreff: [YaesuTuner] Re: extending tuner control cables
Thanks for posting this idea. That is excellent. I've ordered those
pigtails from W4RT and will try something like your idea. I had ordered
some 8 pin mini DIN connectors from Cablestogo but I'm not sure I can
solder wires on those tiny pins. Those pigtails will solve that problem.
I'm working on a portable 43' vertical wire antenna for Field Day. I have
a fiberglass mast from Max Gain Systems with a 43' wire running to the top
of it. I have the FC-40 at the base with the antenna wire on the antenna
post and some radials connected to the ground post. It is tuning
everything from 10 meters down to 160 but I need a longer control cable
since the radio will probably be about 100 feet from the antenna. I'm
using the FT-450 with it for Field Day but have also tried my FT-857D.
--- In YaesuTuner@... <mailto:YaesuTuner%40yahoogroups.com> ,
"Charles Penry" <charles@...> wrote:
To remote my FC-40 I use Ethernet cables with DIN to RJ adapters. I
bought
the male and female DIN connectors with short pigtails from W4RT and the
Ethernet cables and connectors from Home Depot. The RJ connectors come
in a
small plastic box for surface mounting on a wall, like the old wired
phone
jacks. I just ran the DIN connector wires to the screw terminals in the
RJ
connector boxes.
I have used two 100' cables with a double female RJ connector between
them
and it worked great at 200' total length. Just watch out for all the
swapping of wires in Ethernet cables - it's been too long since I built
mine
and I don't remember if the wires cross.
73,
Charles
WA5VHU / YI9VHU
_____
From: YaesuTuner@... <mailto:YaesuTuner%40yahoogroups.com>
[mailto:YaesuTuner@... <mailto:YaesuTuner%40yahoogroups.com> ]
On
Behalf Of w8ob
Sent: Saturday, May 02, 2009 9:58 AM
To: YaesuTuner@... <mailto:YaesuTuner%40yahoogroups.com>
Subject: [YaesuTuner] extending tuner control cables
I want to purchase a fc40 but need to locate it 30-40 feet away from the
shack outside. What are you guys using to extend the 15 meter long
cables?
