?
Thanks for the replys from Clive, and Kyle.? Have been out of town
this weekend, but I think I found the problem:? Took the tape off the end
of the control cable at the tuner end and found lots of moisture.? Haven't
had time to fix and try, but feel sure that is going to be the problem.?
Was letting it dry out, considered squirting WD-40 in it, but haven't yet.?
Will let it dry overnight and check it out tomorrow.
Dave, NJ4F
?
?
----- Original Message -----
Sent: Saturday, March 25, 2006 12:51
PM
Subject: Re: [YaesuTuner] FC-40
problem
hi Dave, i've been using fc-40 over a year. no probs.
?
I'm assuming you've checked ground and the coax hasn't gone
o/cct....to the tuner I mean, cos y'd have poor rx, and HSWR indications... so
it could be a faulty control cable to the fc-40 (cn borrow one from a dealer
to check?)
or try resetting both the 857D and the FC-40.. remember to set
the CAT/LIN/TUNER back to "TUNER" after resets.
alternatively., does it run "off the veh" as a complete
station with a longwire ant and a psu?
?
good luck!
Let us know what u discover!
?
?OH2FBK // G1wzm //9v1az
_____ Original message _____
Subject: [YaesuTuner] FC-40 problem
Author: "davefuseler"
Date: 24th March 2006 11:17:33
