开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. YaesuFT847
  2. Topics

Replacement parts needed.

Bradley RIsk
 

Greetings.
I need to replace the components (encoders?) for the SUB-TUNE and MEM/VFO CH controls on my rig. It got dropped and the shafts broke off. I MIGHT be able to glue/epoxy one of the shafts together, but the other is irreparable. The PC board IDs are S6531 and S6538, but that's the best I can do for identification.

Any hints on what parts I might search on at DigiKey or Mouser or whatever would be appreciated.

73
Brad, N7IVV
 

Hi,

Sub-Tune S6538 Yaseu # Q9000706, Panasonic EVQVEJF0324B
Mem/Vfo S6531? Yaseu # Q9000704, Panasonic EVQVEMF0324B

Check with Yaesu, I bought from the UK branch in 2021.
73
Nils SM7DVO
Bradley RIsk
 

开云体育

Thanks for the info!!

?

73

Brad, N7IVV

?

From: [email protected] <[email protected]> On Behalf Of Nils Ostman
Sent: Monday, December 27, 2021 5:23 AM
To: [email protected]
Subject: Re: [YaesuFT847] Replacement parts needed.

?

Hi,

Sub-Tune S6538 Yaseu # Q9000706, Panasonic EVQVEJF0324B
Mem/Vfo S6531? Yaseu # Q9000704, Panasonic EVQVEMF0324B

Check with Yaesu, I bought from the UK branch in 2021.
73
Nils SM7DVO

 

开云体育

Hi try searching for Q9000704, I bought one from eBay last year for ?10 uk



On 27 Dec 2021, at 09:18, Bradley RIsk <riskbr@...> wrote:

?Greetings.
I need to replace the components (encoders?) for the SUB-TUNE and MEM/VFO CH controls on my rig. It got dropped and the shafts broke off. I MIGHT be able to glue/epoxy one of the shafts together, but the other is irreparable. The PC board IDs are S6531 and S6538, but that's the best I can do for identification.

Any hints on what parts I might search on at DigiKey or Mouser or whatever would be appreciated.

73
Brad, N7IVV

 

I have the MEM/VFO encoder in stock.?
Which is the one that you think you can repair?


On Mon, 27 Dec 2021 at 20:18, John Hopkinson via <hopkinsonj=[email protected]> wrote:
Hi try searching for Q9000704, I bought one from eBay last year for ?10 uk



On 27 Dec 2021, at 09:18, Bradley RIsk <riskbr@...> wrote:

?Greetings.
I need to replace the components (encoders?) for the SUB-TUNE and MEM/VFO CH controls on my rig. It got dropped and the shafts broke off. I MIGHT be able to glue/epoxy one of the shafts together, but the other is irreparable. The PC board IDs are S6531 and S6538, but that's the best I can do for identification.

Any hints on what parts I might search on at DigiKey or Mouser or whatever would be appreciated.

73
Brad, N7IVV

Bradley RIsk
 

开云体育

The repair failed. What do they make those shafts out of that won’t stick to epoxy, CA, or fuse with solvent??? Sheesh.

?

So I need both parts.

?

Brad

?

From: [email protected] <[email protected]> On Behalf Of Andy Bosworth
Sent: Monday, December 27, 2021 3:33 PM
To: [email protected]
Subject: Re: [YaesuFT847] Replacement parts needed.

?

I have the MEM/VFO encoder in stock.?
Which is the one that you think you can repair?

?

?

On Mon, 27 Dec 2021 at 20:18, John Hopkinson via <hopkinsonj=[email protected]> wrote:

Hi try searching for Q9000704, I bought one from eBay last year for ?10 uk

?



On 27 Dec 2021, at 09:18, Bradley RIsk <riskbr@...> wrote:

?Greetings.
I need to replace the components (encoders?) for the SUB-TUNE and MEM/VFO CH controls on my rig. It got dropped and the shafts broke off. I MIGHT be able to glue/epoxy one of the shafts together, but the other is irreparable. The PC board IDs are S6531 and S6538, but that's the best I can do for identification.

Any hints on what parts I might search on at DigiKey or Mouser or whatever would be appreciated.

73
Brad, N7IVV

 

They make parts that will not stick to epoxy because most people do not usually try. I would have drilled the inner out and used a bit of wire or a tiny diameter screwthread as a dowel before trying to glue, to give a better mechanical bond.


On Tue, 28 Dec 2021 at 02:05, Bradley RIsk <riskbr@...> wrote:

The repair failed. What do they make those shafts out of that won’t stick to epoxy, CA, or fuse with solvent??? Sheesh.

?

So I need both parts.

?

Brad

?

From: [email protected] <[email protected]> On Behalf Of Andy Bosworth
Sent: Monday, December 27, 2021 3:33 PM
To: [email protected]
Subject: Re: [YaesuFT847] Replacement parts needed.

?

I have the MEM/VFO encoder in stock.?
Which is the one that you think you can repair?

?

?

On Mon, 27 Dec 2021 at 20:18, John Hopkinson via <hopkinsonj=[email protected]> wrote:

Hi try searching for Q9000704, I bought one from eBay last year for ?10 uk

?



On 27 Dec 2021, at 09:18, Bradley RIsk <riskbr@...> wrote:

?Greetings.
I need to replace the components (encoders?) for the SUB-TUNE and MEM/VFO CH controls on my rig. It got dropped and the shafts broke off. I MIGHT be able to glue/epoxy one of the shafts together, but the other is irreparable. The PC board IDs are S6531 and S6538, but that's the best I can do for identification.

Any hints on what parts I might search on at DigiKey or Mouser or whatever would be appreciated.

73
Brad, N7IVV

Bradley RIsk
 

I repaired one of the shafts successfully by printing a D-shaped insert (the whole shaft is hollow) and gluing it in place. Perfect repair.

Thanks for the help guys!

Brad, N7IVV

1 - 8 of 8