Re: Replacement parts needed.
|
They make parts that will not stick to epoxy because most people do not usually try. I would have drilled the inner out and used a bit of wire or a tiny diameter screwthread as a dowel before trying to glue, to give a better mechanical bond.
On Tue, 28 Dec 2021 at 02:05, Bradley RIsk < riskbr@...> wrote:
The repair failed. What do they make those shafts out of that won’t stick to epoxy, CA, or fuse with solvent??? Sheesh.
?
So I need both parts.
?
Brad
?
?
I have the MEM/VFO encoder in stock.?
Which is the one that you think you can repair?
?
On Mon, 27 Dec 2021 at 20:18, John Hopkinson via <hopkinsonj=[email protected]> wrote:
Hi try searching for Q9000704, I bought one from eBay last year for ?10 uk
?
On 27 Dec 2021, at 09:18, Bradley RIsk <riskbr@...> wrote:
?Greetings.
I need to replace the components (encoders?) for the SUB-TUNE and MEM/VFO CH controls on my rig. It got dropped and the shafts broke off. I MIGHT be able to glue/epoxy one of the shafts together, but the other is irreparable. The PC board IDs are S6531 and
S6538, but that's the best I can do for identification.
Any hints on what parts I might search on at DigiKey or Mouser or whatever would be appreciated.
73
Brad, N7IVV
|
Andy Bosworth