¿ªÔÆÌåÓý

Speaking of connections to the FT-847, what apps are everyone using? We talk a lot about the connection to the rig, what would users use to test that connection? I am sure others might like to know,

? ? ? ?Hi Stu, Yes the 8 bits part is correct but more importantly you need 2 stop bits. I¡¯m just surmising here but I believe early Yaesu radios did not have full synchronous

Sorry I didn't have that in my notes.? I don't have my FT-847 interfaced anymore but I did check the radio's menu and the CAT rate I was using was set to 9600.? I'm also quite certain it was 8 data

Ron, I'm a bit puzzled by the phrase "not recognized" by the software. I don't recall any of the Ham software packages "recognizing" the 847 as an 847. Rather, I tell the software that I

Sounds like it is weak and noisy Need a spectrum analyser 73 Andrew ?Get BlueMail for Android ?

Quick question? Are you using 9600,8,n,2,n That means 2 stop bits? If not then you must use 2 stop bits. De Spence G5STO Sent while portable! please excuse typos.

I checked my notes, the FT847 is a Null modem connection to RS232 port.

Hello, Ron,I use SUCCI with FT847, Icom 725 and Icom 756pro3, never problem, use it with UCX Log and with satellite connection with SatPC32 without problems, many years.Vy 73 Yvan HB9C? Envoy¨¦

Thanks for the reactions and possible solutions. The USB is reacting good to Windows 11 commands, but the FT-847 is not recognised by several softwares like FL-Digi, HamRadio Deluxe or WSJT-X. I

https://picclick.fr/SUCCI-Simple-USB-CAT-CW-Interface-280881362532.html Vy 73 Yvan HB9CSM Envoy¨¦ depuis Yahoo?Mail pour iPhone

https://www.kotarov.com/projects/succi Vy 74 Yvan HB9CSM Envoy¨¦ depuis Yahoo?Mail pour iPhone

Hi Ron, WJ1I? here and 73 from Cape Cod .I have a 847 running rock solid on CAT control.? You cannot use the external tuner control and CAT at the same time...one or the other.? Very important- you

Wondering what you mean by it "not connecting" to the 847... Assuming you have an 847 with a recent-enough serial number to have 2-way communication, one thing that might be a problem is the

Huge amount of noise on TP1002. But I was eventually able to sync on a signal that was nearly double the expected 45-ish MHz.. More like 76 MHz. I appreciate all the input and suggestions. Truely.

Hello,I use for FT847 interface SUCCI with total succes, RS232 from FT847 and OUT USB, CW, PTT and PEDAL.You find it on eBay for about 20€, when I remember... Vy 73 Yvan HB9CSM

Hi, Can someone advise me a USB to serial RS-232 cable that works with the FT-847. I have a model with a Prolific230GT chip that does not connect. I have done several tests with a serial check

Here here, these radios do drift over time ?Get BlueMail for Android ?

I would check to see if your reference oscillator is even oscillating.? Do you see 45.250 MHz on TP1002? You said it transmits in FM.? Just because there is RF showing on a Wattmeter does not mean

I got the radio opened up this morning and finally located both TP1003 and the T1009 adjustment. It looks as though someone has 'technified' this rig before I got to it. I found a single

Andrew, Good morning ¨C I am finally getting back to my FT-847 troubleshooting. Yesterday, I performed the test of TP1003 and adjustment of T1009. I found that there is a maximum voltage of