开云体育

Yes, too bad for Paypal, I stop use it also...Otherweis, it is Vesselin Kotarov LZ5VK (vesselin@...) who is conceptor of this interface. Vy 73 de Yvan HB9CSM

I found that RT Systems programing software provided a USB to serial interface for the FT-847.Also enabled PCSat32 (and Ham Radio Deluxe)? to work fine.?73 Dennis VE3XC

</g/YaesuFT847/message/300> Need Guide to Use FT-847 For Digital

Hi, I’m not sure of the question you’re asking exactly, but I think what you are asking requires one of these forget the price just look at the item and find one of

I use this one,but I added Logic inverter for FTDI.

What modem do you use for digital ? ----- Mensagem de TA2YGT <asena.34.ask@...> --------- Data: Mon, 30 Oct 2023 10:19:29 -0700 De: TA2YGT <asena.34.ask@...> Assunto: Re:

Thx Jaime for answer. I will use Digital Modes for VHF.

Thx Jeff for answering. It will work fine but I want to isolate between PC and Yaesu.?Does this null modem cable (FTDI,Profilic,CH340 etc.) provide isolation between the PC and Yaesu? As far as I

Thx Yvan for answer the question but in my country we can not order because We can not use Paypal. It is banned on TR.

Or: https://pt.aliexpress.com/item/1005005853390210.html?gatewayAdapt=glo2bra What do you use for Digital modes/cw ? 73 CU3AK Eloy ----- Mensagem de Jeff M0UHF <jeff.elliott45@...>

<https://www.ebay.co.uk/itm/192873045696?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=7qaf0C6WSW-&sssrc=4429486&ssuid=NfzeolfuRXq&var=&widget_ver=artemis&media=COPY> [s-l400.jpg] FTDI USB Cat cable

Hello dr om, I use FT847 with SUCCI interface and no problems, I connect FT847 by his cable to SUCCI interface (eBay) you must specified then it is for FT847.I use it more then 10 years with UCX Log

Hello everyone, I bought a second hand Yaesu FT847 and then I was build a isolated interface for DATA IN/OUT port. It works very well but I haven't build null modem cable for CAT control. I am not

Can someone point me to the correct mini dip plugs for the FT840 and FT847.? I am looking for them for the tuner jacks in particular.? On the FT840 one appears to be a 5 pin mini din but the center

for SSB modes you must use the 1/8" TRS data jack for audio in/out and keying the circuit is shown in the manual neither of my 847s are deaf not great? but not deaf

HI All 100% correct! I would also add that compared to the position of the minimum distance (= height at EL 90 degrees), you will have the frequency of the SATELLITE which for the IO-117, would seem

Hi Spence, the fact that you have to use different frequencies when transmitting and receiving is quite simply the Doppler principle. It also has nothing to do with linear. Of course, these two

All that I know is I am using the Data Port to the Signalink. Gary [email protected]> wrote:

Doesn't the 847 use a different output port for VHF/UHF? Micky K1XH

Anyone have noise issues with the SIGNALINK USB on MSK144 with the FT-847. My FT847 is quite deaf on 6 meter MSK144 and it seems the issue is Noise with the Signalink USB. I utilize the Data Port on