开云体育

One page 16 of my manual in the section re "AFSK TNC Connections". Check the diagram showing a 10uf cap and 2K ohm resistor connected to the AFSK TNC. Easy to build your own if you can obtain the

Ian, Greg Thank you for your responses. I don't see anything in the manual that mentions the PTT keying on the DATA IN/OUT jack. Am I missing something? How do I go about separating the PTT line or

Congrats on the new rig! Great radio, but it has it's quirks. You've run into my #1 peeve. There are two jacks on the back for interfacing with digital stuff. The DIN port is for

Hi Max Regarding using data on the FT-847 its a little bit complicated compared to more modern transceivers. As a rule of thumb you use the Packet port for FM based operation and the Data In/Out for

Hello to the group, Just took delivery of an 847. Great radio. I'm just in the process of getting everything hooked up, CAT, digital modes etc. I plugged my signal lines into the DATA in/out jack

Ha!? Thanks, didn't see that before. Greg? KO6TH gw3fsp via groups.io wrote:

Thanks Vic. Something in my head says I should have thought of that myself. Dennis VE3XC

Hi Greg, check the Group Files section, there is a folder there - FT847 Mods - in there you will find a Yeasu datasheet on frequency mods, it extends the range of the set. i uploaded it quite a while

Out of band mod? I wasn't aware that there were any such mods for the radio (e.g. to get it to Tx on the WARC bands)... Greg KO6TH Dave K?EKL wrote:

Thanks for the replies. I have not yet fully unpacked the truck from Field Day. When I do bring the radio back into the shack I'll try a full reset, try transmitting on freqs across the 80m band and

True Get Outlook for Android

You can not I meant to say. ?It is expecting to be full duplex and can’t if tx and rx is on the same band.?Vic Sent from AT&T Yahoo Mail for iPhone

You can use the sub on the same band. You have to use split a/b vfo.?Satpc32 help file explains what to do for ISS etc.?Vic? Sent from AT&T Yahoo Mail for iPhone

Try wide banding it then a reset, failing that as these radios are rather old, so perform an alignment, this should sort it out. BR Andrew If you can not perform this then I can Get Outlook for

Field Day really brings out the problems. I have 2 FT-847's. One belongs to the Club which I cloned to be the same as mine. For the ISS V/v frequencies, both do the same thing. Main vfo shows 145.850,

Try it on 3.799 wrote:

Did you perform a memory clear all reset? Sent from AT&T Yahoo Mail for iPhone

Hi, That suggests to me that it’s UK model… our 80mtr band stops at 3.8Mhz... 73 de Frank, M0AEU

I have an 847 that I use almost exclusively for VHF/UHF week signal work and for satellites but it got pressed into service for our local club's Field Day this last weekend. It performed perfectly on

Just to put my two pennies worth in! What key will you be using? Iambic, swipe or straight? If you going to use a DL then I like to use a 600hz side tone (menu 6) as it always felt nicer on the