开云体育

Hi Nina, I have two FT847’s, two FC20’s and two MD100 microphones. Sad I know but also two G5500’s. I went though a phase of buying everything twice when the opportunity came up so can take some

Hi Andrew, I’ve got a good stock of BAT46 and BAT85’s (used in the FT847) so thank you for the offer. Fortunately I have a few decent SWR meters and 50w and 100w elements and also aware of the

If yoy need some close up photos of a not toasted FC-20. Let med know. Nils SM7DVO

Hi if you used a Bird through line, make sure the element power is low i.e. 50 Watts when using on reflected, as most SWR meters have a more sensitive scale on reflected! The Bird is the same scale in

Hi Spence, A good site to find manuals etc. for Yaesu is either the main Yaesu site, or the FoxTango.org ( http://foxtango.org/foxtango001.htm ) site.? On the FT site, look at the right side of the

Hi Andrew, the information is spot on and I really appreciate it. Just waiting for a callback or email from Yaesu UK. They’re pretty good chaps there so normally turn things around quickly. As

This may help, I have not found set up instructions yet BR Andrew

Hi This is a standard circuit, once you have replace all the burnt track and components, now set the power to 10 Watts, and transmit via an SWR meter into TH FC-20 then into a dummy load on 14.125

Following on from my email and see that VF and VR go to the MCU De Spence M0STO Sent while portable! please excuse typos.

Hi, a strange question. I had been given an FC20 many years ago by a ham now sadly SK and it seems to have had a mini melt down. Inside near the control port there’s a sensing inductor and the

CatRadio is the new free software to control rig via PC. It uses the Hamlib libraries and supports many models and functions. Please download here https://www.pianetaradio.it/blog/catradio/ and

Is your 847 one of the early ones, without the bi-directional serial capability? That's why the UNI was created. The symptoms suggest yours is an early model. There's a decoder

I've been running JTDX with JTAlert and OMlog for so long that I can't recall whether Omnirig is used at all here, certainly not loaded as a seperate item. Attached is a screen capture of my JTDX

I have been having trouble with CAT control as well, trying to use WSJT-X as well as JTDX. There are 2 selections within OmniRig that I can use - FT847 and FT847 (UNI) which I believe would stand for

Thank you, Wayne!

I wonder if any one can help me, my FT847 stopped transmitting on LSB, USB and AM, FM is fine with Full 100 Watts on HF and 50 Watts on VHF. I traced the audio going in and it gets to Q1043 at TP

right from the files section /g/YaesuFT847/files/FT-847%20Mods/FT-847%20mods.pdf even in that document there is conflicting information the instructions direct from Yaesu were

Thank you for your reply. Do you have the specifics on how to make the mod? I've seen a couple of mods showing shorting solder pads, but there was inconsistency in which did what. I only want to open

http://www.hampedia.net/yaesu/ft-847-help-with-a-noisy-fan.php https://www.transmission1.net/viewtopic.php?t=20909 Try these for a start Ravi/M0RVI -- I'm here to add more value to the world than

Hi Greg, there are two fans in the 847. The one on the rear panel runs continuously. The larger internal fan only becomes active in TX. Neither of them have any form of temperature control. Most of