开云体育

The pins are fine and I also did a continuity test, 100%. The radio flickers when turning it on with FC-20 connected. Sometimes the radio doesn't even come on. Once you disconnect the FC-20,

Is the radio or the FC-20 shutting down? Is the cable ok? The pins are really thin and is easy to bend. Give me more info and I will look into the problem /Nils SM7DVO

I would like to thank Nils Ostman for posting the info on the AF/RF pot on Ebay. I was able to order one and have just finished replacing the bent one for the new one. I was also able to dedust the

Excellent information, Nils. It's very helpful. No, I'm not sure that Q3004 is good. I only know that the radio is completely deaf when the "RF AMP" button is pushed on 70 CM. Tack!

That transistor "IMD3 T108" is a strange fellow. You can find info by Google it. Yaesu part # is G3070053. I'm sure they have it in stock. Can also be found elseware used by Panasonic and others. Are

I have an FT-847 that I use almost exclusively for satellite work. With RS-44 now activated I'm using mode J (2m up, 70cm down) a lot and I've noticed that when I press the "RF AMP" button the

Thanks Bob, I have a very nice 847 with both optional filters and fully modified for 4M. It’s in good condition, Speak soon Best Regards Tim Hague

Hi, Tim,? Just sorting the list put and transferring between machines, but you were first to reply so I'll make sure you get your list well before the others!? "Best regards? Bob Need to define

Hi Bob I am looking to sell mine but am not in the UK! Let me know if you are interested. Joe VA3JLF Sent from Mail for Windows 10 From: bobsayers2000 via groups.io Sent: April 22, 2020 6:14

What do you have to exchange Bob?, might be interested in anything KW or Vintage AM PM me Best Regards Tim Hague

Looking to buy an 847 (had one when they were new) , probably only in the UK as the weight probably makes overseas deals impractical.? Wanted primarily for SSB above 30MHz, so might consider a model

https://www.ebay.com/itm/NEW-Yaesu-J62800135-VOL-RF-POT-RH96D190-10KA-10KC-1ea-for-FT-847-FT847-VR-5000-/301675691737

Does anyone have the Yaesu and/or manufacturer’s part number for VR6501? ?This is the dual 10k pot used to control AF and RF. My shaft got bent due to the sellers horrible packing. I scoured all

Hi Karl, Signalink is good.? I've been using one on both my 847 and also on my FT-2000D. They are very simple to use and fast to get up and going. 73 Russ, N4MAV

MiniPro SC by G4ZLP. Cable is available for both the Packet and HF Data ports. I've used one with both an 847 and 817, works very well. 73 Ian VK6CR

Hello Group, Karl here, Stuck inside here in Ohio and thought I would try out other modes. Any input on interface to purchase ? Thought about Signalink but uses mic input ? Any advice would help

I have a functioning FT847 which I have since replaced with a more modern rig. I am going to list it on ebay. Contact me private if interested. Joe VA3JLF Sent from Mail for Windows 10 Sent:

I'm restoring an old FT-847 after a visit from "Mr. Lightning". Yaesu UK seems to have a lot of parts in stock. I managed to get "impossible" parts trough them. You need VR6502 from Panel Unit? Send

I inherited an FT 847 from my late Brother's estate. The town building inspector shipped me some items from his estate to me in California, one of which was my brothers' FT 847. Unfortunately he had

Hi Nils I currently still own my ft847 as a second and will be looking to sell it at some point. I don’t think I can help you with your specific problem but I am monitoring the list to keep in