开云体育

FYI… some additional info…These are some of my old notes I had for my FT-847… you may find useful. The Upgrade for older version is no longer available The original design for the FT-847

Hello Franco I can answer your question about the CAT. I bought an early serial number 847 and when the radio debuted, it did not even have two way frequency and mode CAT, no CAT at all. For some

Thanks Ruben for the info.... If you see on the list, it is not possible to set the channel number and save or download the data contained in the radio.So at least it seems from the commands

Yvan, In the manual, page 92, set frequency P1=01 Set to main VFO, P2=11 Set to SAT RX VFO, P1=12 Set to SAT TX VFO Ruben WA2NBL

HI ALL Thanks reply but probably the complete commands are not specified in my manual, especially those of the *SAT memories* which it seems that the ADMS847 manages. So either there are more

Hello, Have you manual for ft847?? There are list of CAT controls. Yvan HB9CSM Provenance?: Courrier pour Windows 10 Envoyé le?:samedi, 21 décembre 2019 12:22 ??:

RT Systems has a product ADMS-847 $49.00 US with cable Ruben WA2NBL

Hi Franco If you are looking to connect a microham microkeyer to the 847, I have a DB39 cable for the FT847 that I am willing to sell, as I am not using my 847 at the moment. The microkeyer is a very

Hello, Perhaps in catalog of Microham interfaces you find something for you ??? MXHNY 2020 Vy 73 es dx Yvan HB9CSM Provenance?: Courrier pour Windows 10 Envoyé le?:vendredi, 20 décembre

HI ALL, I what windows app to manage FT847 memories. I would like to be able to manage above all the FT847 memories and the *SAT memories* with the *SAT TAGs* : 12 are little and I wanted to be able

Just checked VE3NO and don’t recognize the name. I only moved to Ontario in 2008 from the NWT. I used to have my 847 connected to a microkeyer 2 for the digital modes. A lot easier and Better(?)

Thanks Joe! I've had to downsize here to one small corner of bedroom & the attraction was HF/VHF/UHF in one box! Will keep the group posted on my results when rig arrives from Germany! Just for

Hi Mike I have just replaced my Yaesu 847 with another rig after having owned it since the early 90’s without any problems. It is a venerable rig that’s for sure. I can help to an extent with

Welcome Mike and thanks for passing on your greetings.? Good to have you here and there is enough talent here to answer or research most problems with the FT-847. 73 and Merry Christmas and Happy

New to this group. Just purchased an 847. Haven't had a Yaesu in a while & wanted another that I could afford to buy! 73 to All & best wishes for a MXHNY to everyone who celebrates those

Looking at the circuit diagram available here http://www.darkside.cz/~hm/ft-847_service_12.pdf Check voltage at J4003 pin 5. This feeds in to Q4011, that then turns on Q4010, which goes via L4030 to

<pre class="tw-data-text tw-text-large tw-ta" data-placeholder="Traduction" dir="ltr" id="tw-target-text" style="text-align:left"><span tabindex="0" lang="en">Hi all, I do not have 12V voltage

Ok Russ, thanks. Leighton. GW3FSP.

You all ready are Leighton. :) Did it yesterday and uploaded the files also. I have made it so that only you and I for now can upload files to the files section after we make sure they are not

Many thanks OM. Early afternoon for you. Get your feet up, maybe a nap :-). James