开云体育

Asterisk on a schematic usually indicate parts not used or that they are factory selected parts in a tuned circuit.

Download the Service manual, also look for some good circuit diagrams they are on these forum. 73 Andrew away from my PC at home ?Get BlueMail for Android ?

I am looking for a parts list of the hf pa unit, because in the diagram a number of parts are marked with *** and no value. Such as R5030, R5031, R5013, C5143, and R5038.

Awesome thanks. I just wanted to give it a try to be honest. Shame the author has gone underground as I can’t find a single live link to the program and the authors site is well and truly

Hi , you can get a demo copy of RATS847 in the files section of this group. It works but has a "block" screen that pops up every 10 minutes or so for unregistered copies. I don't know of a way to

? ?Hi Ron, It’s normal for CTS, DCD and DSR to go green so no worries there. Firstly we should try a test though and that’s a simple loop back test. You need to locate pins 2 and 3

Spence, with RealTerm 2.0.0.70 I see the CTS - DCD - and DSR go to green. When typing in the terminal window the TXD is flashing yellow. RXD is always blank. No frequency is shown on the

+1 for this test. If you have a volt meter, it might be instructive just to measure what the radio is putting out on the serial out line. It might reveal a bad serial port driver

Sorry correction RealTerm and NOT terra Term (I use both) Sent while portable! please excuse typos.

?Ok try this, Ensure the radio is set to 9600 baud. Open Terra Term (free download). Select the right port and open the terminal. Select satellite mode on the radio. If you’re

It is pointing toward a hard radio issue isn't it?? Before throwing in the towel, double (double) check the cable pin outs are correct and you have continuity ( The manual shows only 3 active pins so

Qui ignore mes message d aide, tant pos pour lui...??? Envoyé depuis Yahoo?Mail pour iPhone

David and Greg, I just got my radio second hand last week. The CAT problem showed on the first try. I tested HamRadioDeluxe, WSJT-X, FL-Digi (FL-Rig), RATS847 and some others. Omnirig does not give

Good progress. Sorry if you already answered this... is this a new problem (that was working before) or the first time CAT controlling the FT847? I have to confess I've never come across the RATS847

Good news that the radio is hearing the computer and acting properly. A lot has to be configured right for that to work. Since it appears that your radio has the newer CAT controller

I tried several FTDI chip serial converters with or without null-modem cables. The coms are 9600, 8,n,2 with or without dtr-rts activated. Seems there is no reply from the radio when connected.

Mine spends most of its time running? satpc32? for satellite ops and? I routinely use Ham Radio Deluxe from a Windows PC.? I run WSJTX from both a windows pc but more usually from a Raspberry Pi.

Apps?? Lots: - WSJTX for FT-8, et al - QSSTV or MMSSTV for SSTV - fldigi for the rest of HF digital modes - Direwolf for all the AX.25 packet apps - Linpac, pat winlink, YAAC - rigctl - Gpredict

UCX Log since 10 years... Vy 73 Yvan HB9CSM

Speaking of connections to the FT-847, what apps are everyone using? We talk a lot about the connection to the rig, what would users use to test that connection? I am sure others might like to know,