Re: FT-847 Free Memory Manager?
Hi Paul.
No worries on my name, many people also choose to spell it with an 'e', but I don't.
I don't look anything like that famous Mouse...
I also have just received my FT-847, my best friend had one that his widow agreed to sell to me after he passed away in July. She had sold it to someone else before I got down there with the money. Anyway, I finally found one, and am currently putting it thru it's paces to see if everything is working OK. I am able to program memories using the FTBasicMMO software just fine now, thanks again for the tip. You will need the software if you choose to program the memories for SAT use, (not REALLY necessary, but it helps a lot!) makes crossband programming a lot easier. I don't have the AZ/EL rotor and antennas necessary yet for satellite use, that is probably the last thing I will work towards this year.
I am not sure about the 4M mod, how would I check to see if it is enabled? Is there a setting in the extended menus for that or does it require pulling the covers off?
Micky K1XH
|
Re: FT-847 Free Memory Manager?
Micky?
apologies for getting your name wrong on the first over!!
Glad the info will be of good use,please let me know how you get on with the software and programming.
Recently just before Christmas I managed to get an FT-847 and I’m hoping to use it for satellites mainly and perhaps 6 mtrs.
Has your 847 got the 4mtr mod?
Paul GW4ZYG?
On 12 Jan 2021, at 12:18, Micky Corrow via < opus@...> wrote:
toggle quoted message
Show quoted text
Thank you Paul, that is exactly what I was looking for.
I had used it in the past but was under the impression that it was a paid app.
I understand that now it is freeware, and users can make a donation if they wish.
With Bob in declining health, I hope everyone who uses this software can make a donation and possibly help him out a bit.
Micky K1XH
|
Re: FT-847 Free Memory Manager?
Thank you Paul, that is exactly what I was looking for.
I had used it in the past but was under the impression that it was a paid app.
I understand that now it is freeware, and users can make a donation if they wish.
With Bob in declining health, I hope everyone who uses this software can make a donation and possibly help him out a bit.
Micky K1XH
|
Re: FT-847 Free Memory Manager?
Nicky
Is this any good to you ? and I think that it’s a free download.
FTBASICMMO?
73’
Paul?
On 12 Jan 2021, at 03:34, Micky Corrow via < opus@...> wrote:
toggle quoted message
Show quoted text
I know this may have been asked before, but I couldn't find the answer...Is there a free memory manager app?
Something that would allow a user to pre-program the memories then upload to the radio?
I am familiar with the RT Systems software, but would rather spend the cash on better antennas.
What about an app to save the menu contents? Does such a thing exist?
Micky K1XH
|
FT-847 Free Memory Manager?
I know this may have been asked before, but I couldn't find the answer...Is there a free memory manager app?
Something that would allow a user to pre-program the memories then upload to the radio?
I am familiar with the RT Systems software, but would rather spend the cash on better antennas.
What about an app to save the menu contents? Does such a thing exist?
Micky K1XH
|
Re: Mem/VFO CH encoder repair, not replacement - works!
I have been doing this repair for a few years, and for any members who use Facebook there are pictures on one of the FT847 groups showing how to do it.
|
Re: Mem/VFO CH encoder repair, not replacement - works!
Good, useful info! Thanks Eric.
73 de Mike, zl1mh.
?
|
Mem/VFO CH encoder repair, not replacement - works!
Hi All,
Got a 2002 model, still working great. The MEM/VFO CH encoder got flaky a 2-3 years ago, would skip and jump around. Got TWO replacement encoders from Yaesu at that time, put them in a box somewhere. Finally got a moment of time to try this fix.
Top and bottom covers off, knobs off, front panel off, small pile of nuts washers and screws (was easy to put them all back in the right place). Unplug a few cables, pry the sheet metal open, and out popped the front control PCB.
Did NOT try to "clean" the LCD or plastic screen, they were good enough. Did blow out a bit of dust and lint from the chassis.
Un-soldered the encoder, but did NOT put in a new one. Pried up 4 small metal tabs on the old encoder, and pulled it all apart. Q-tips, alcohol and contact cleaner got off some old lubricant that was mostly just a bit sticky. A new tiny dab of Ox-gard on the contact fingers and contact wheel. Bent the tiny tabs back down and soldered the encoder it back in to the PCB.
Put the whole mess back together. Did NOT break a single thing, or have any left over parts!
MEM/VFO CH encoder now works just like new. Doubled up the power switch contacts with a few tiny bits of wire while I was in there.
I bet I could do this 2-4 times before the encoder tabs broke, or a solder pad lifted from the board. Good enough for a 18 year old radio. If I had bothered to use the new encoder, I would save the old one for for repair and replacement the NEXT time.
The new encoder I got from Yeasu has the tactile detents. There was a small spring plate on the encoder that could be removed if you wanted to use the encoder for the free spinning SUB-TUNE position.
Resources:
- talks about the power switch, but good info on dis-assembly.
- some good pictures of the chassis insides.
73,
Eric / ke6mlf
|
Re: FT-847 Serial Numbers?
My FT 847 Have switch out the diodes and gained the pwr sw with an added cap has a ser # 8C020049. don't believed it has been upgraded!
Wm AD0VB
|
Re: {Some tags disabled} Re: [YaesuFT847] FT-847 Serial Numbers?
HI ? My previous radio was the 847 early production run and yes Yaesu did offer to do the fix free of charge.? I live in Canada and only had to send the rig to my local shop.? After the mod, all was well.?? I really liked that radio and still have it. ? Good luck and 73 ? Joe VA3JLF ? Sent from for Windows 10 ?
toggle quoted message
Show quoted text
From: Nils OstmanSent: January 8, 2021 2:49 AM To: [email protected]Subject: {Some tags disabled} Re: [YaesuFT847] FT-847 Serial Numbers? ? Regarding the CAT problem:
Generally, prior to the 8G05 production run, there was one main problem in the design of the radio: it only had unidirectional CAT control for frequency and mode (i.e., you could only use the PC to command the rig but not to report the rig frequency and mode back to the software on the PC). Beginning with production run 8G05, the radios have bidirectional CAT for frequency and mode (PC commanding the rig, and the rig reporting information to the PC). In the USA (at least), Yaesu offered to upgrade all radios older than 8G05xxxx under warranty, which involved replacing a computer chip in the radio and some other modifications. Many people with earlier rigs took Yaesu up on their offer.
Some service centers may still have the new CPU in stock. If? you have a rig with the faulty CPU and can't find a CPU nearby get in touch with Geroff at Castle electronics ,?
Nils SM7DVO
|
Re: FT-847 Serial Numbers?
??????? ??? ??, 7 ????? 2021 ?-17:43 ??? ?Micky Corrow via ?? <?opus= [email protected]??>:?
Greetings all.
Is there a way to determine the year of manufacture of the radio from the serial #?
Which radios/years do not have the bidirectional CAT control?
Is there an easy way to tell the difference from the serial #?
Micky K1XH
|
Re: FT-847 Serial Numbers?
Regarding the CAT problem:
Generally, prior to the 8G05 production run, there was one main problem in the design of the radio: it only had unidirectional CAT control for frequency and mode (i.e., you could only use the PC to command the rig but not to report the rig frequency and mode back to the software on the PC). Beginning with production run 8G05, the radios have bidirectional CAT for frequency and mode (PC commanding the rig, and the rig reporting information to the PC). In the USA (at least), Yaesu offered to upgrade all radios older than 8G05xxxx under warranty, which involved replacing a computer chip in the radio and some other modifications. Many people with earlier rigs took Yaesu up on their offer.
Some service centers may still have the new CPU in stock. If? you have a rig with the faulty CPU and can't find a CPU nearby get in touch with Geroff at Castle electronics ,?
Nils SM7DVO
|
Re: FT-847 Serial Numbers?
Hi folks, this is the chartI use.
847 SERIAL NUMBER DE-CODE FOR DATE
First number - YEAR CODE
1 = 1991, 2001, 2011
Month code
C = JAN
D = FEB
E = MAR
F = APR
G = MAY
H = JUN
I = JUL
J = AUG
K = SEP
L = OCT
M = NOV
N = DEC
Batch code next 2 numbers
08 = Batch 8
Serial number next in batch
0069
My set made - 2001 or 1991, November, Batch 8, Serial 0069 in batch
Leighton. GW3FSP.
|
Re: FT-847 Serial Numbers?
Hi all,? Quick search I found this:?
"...Yaesu appears to use the following format for serial numbers on their
amateur products:
?
Year of manufacture-Month of manufacture-Production Run-Individual Unit
number, where the month of manufacture is offset by 2, so "C" means January,
"D" means February, "E" means March, and so forth.
?
Example: 8G051234 = 1998, May (fifth month, or "G"), Production Run 05, unit
#1234 in this run.
?
One key serial number range is 8G05. This seems to be the point at which
Yaesu had corrected the bi-directional CAT issue and made some other
improvements. This version was made in May 1998. Later serial numbers (e.g.,
8L09nnnn) all seem to have incorporated the earlier improvements plus new
ones...."
Hope it helps
73, HNY,
Jorge?
ct1exr
|
Re: FT-847 Serial Numbers?
??????? ??? ??, 7 ????? 2021 ?-17:43 ??? ?Micky Corrow via ?? <?opus= [email protected]??>:?
Greetings all.
Is there a way to determine the year of manufacture of the radio from the serial #?
Which radios/years do not have the bidirectional CAT control?
Is there an easy way to tell the difference from the serial #?
Micky K1XH
|
Greetings all.
Is there a way to determine the year of manufacture of the radio from the serial #?
Which radios/years do not have the bidirectional CAT control?
Is there an easy way to tell the difference from the serial #?
Micky K1XH
|
Service Manual - differences
For those technically inclined:
The available pdf service manual (technical supplement) is version 1.2.? There must be a version 1.0 or 1.1. My RF board layout (backside) does not match the manual (or the schematic). Specifically, C3018 has a three leaded device? (like a SOT-23) hooked to it (and it is shorted). It's not Q3004 - that is a four leaded device. There is no UHF reception and this is the reason why - signal is shorted to ground here.
thx,
Alan, W4FBI
|
Leighton - ok thx, indeed.
Alan, W4FBI
|
Hi alan, as far as Know it should be in ' backup ' this keeps the memory active for your settings.
Leighton. GW3FSP.
|
Next to the 3.3v lithium battery is S1001 switch. Position is 'OFF" or 'Backup'
Can't find any info on it. What position should it be in for normal operation?
thx
Alan, W4FBI
|
Andy Bosworth
Eric Oberg
Icomratt
Nils Ostman
gw3fsp
W4FBI