开云体育

It is pointing toward a hard radio issue isn't it?? Before throwing in the towel, double (double) check the cable pin outs are correct and you have continuity ( The manual shows only 3 active pins so

Qui ignore mes message d aide, tant pos pour lui...??? Envoyé depuis Yahoo?Mail pour iPhone

David and Greg, I just got my radio second hand last week. The CAT problem showed on the first try. I tested HamRadioDeluxe, WSJT-X, FL-Digi (FL-Rig), RATS847 and some others. Omnirig does not give

Good progress. Sorry if you already answered this... is this a new problem (that was working before) or the first time CAT controlling the FT847? I have to confess I've never come across the RATS847

Good news that the radio is hearing the computer and acting properly. A lot has to be configured right for that to work. Since it appears that your radio has the newer CAT controller

I tried several FTDI chip serial converters with or without null-modem cables. The coms are 9600, 8,n,2 with or without dtr-rts activated. Seems there is no reply from the radio when connected.

Mine spends most of its time running? satpc32? for satellite ops and? I routinely use Ham Radio Deluxe from a Windows PC.? I run WSJTX from both a windows pc but more usually from a Raspberry Pi.

Apps?? Lots: - WSJTX for FT-8, et al - QSSTV or MMSSTV for SSTV - fldigi for the rest of HF digital modes - Direwolf for all the AX.25 packet apps - Linpac, pat winlink, YAAC - rigctl - Gpredict

UCX Log since 10 years... Vy 73 Yvan HB9CSM

Speaking of connections to the FT-847, what apps are everyone using? We talk a lot about the connection to the rig, what would users use to test that connection? I am sure others might like to know,

? ? ? ?Hi Stu, Yes the 8 bits part is correct but more importantly you need 2 stop bits. I’m just surmising here but I believe early Yaesu radios did not have full synchronous

Sorry I didn't have that in my notes.? I don't have my FT-847 interfaced anymore but I did check the radio's menu and the CAT rate I was using was set to 9600.? I'm also quite certain it was 8 data

Ron, I'm a bit puzzled by the phrase "not recognized" by the software. I don't recall any of the Ham software packages "recognizing" the 847 as an 847. Rather, I tell the software that I

Sounds like it is weak and noisy Need a spectrum analyser 73 Andrew ?Get BlueMail for Android ?

Quick question? Are you using 9600,8,n,2,n That means 2 stop bits? If not then you must use 2 stop bits. De Spence G5STO Sent while portable! please excuse typos.

I checked my notes, the FT847 is a Null modem connection to RS232 port.

Hello, Ron,I use SUCCI with FT847, Icom 725 and Icom 756pro3, never problem, use it with UCX Log and with satellite connection with SatPC32 without problems, many years.Vy 73 Yvan HB9C? Envoyé

Thanks for the reactions and possible solutions. The USB is reacting good to Windows 11 commands, but the FT-847 is not recognised by several softwares like FL-Digi, HamRadio Deluxe or WSJT-X. I

https://picclick.fr/SUCCI-Simple-USB-CAT-CW-Interface-280881362532.html Vy 73 Yvan HB9CSM Envoyé depuis Yahoo?Mail pour iPhone

https://www.kotarov.com/projects/succi Vy 74 Yvan HB9CSM Envoyé depuis Yahoo?Mail pour iPhone