May be a silly suggestion, is IF shift in correct position?
On Tue, 22 Aug 2023 at 14:20, Jaime Eloy <
cu3ak@...> wrote:
I already did a reset. Same.?
TNX already removed the knob.
73
Data: Tue, 22 Aug 2023 14:04:13 +0100
Assunto: Re: [YaesuFT847] No S meter reading
Do a reset on radio first before finding a fault that may not exist.
VFO knob is removed by turning radio upside down, look at shuffle jog, there is a slot in it. Use small Allen Key, about 1.5mm or 2mm and there is grubscrew in main knob.
On Tue, 22 Aug 2023 at 13:55, Jaime Eloy <
cu3ak@...> wrote:
OK! TNX for answer.
How do I remove the front knob of the radio? I need to clean the board.
73
----- Mensagem de Andrew Lenton <
a@...> ---------
Data: Tue, 22 Aug 2023 13:26:31 +0100
De: Andrew Lenton <
a@...>
Assunto: Re: [YaesuFT847] No S meter reading
Hi S meter is derived from the agc level, do a place to start
Andrew on beach in Cornwall
Get
On 22 Aug 2023, at 13:00, Jaime Eloy <
cu3ak@...> wrote:
My FT847 do not have any s meter reading. Audio seems ok as tx also.
Where to look pse for this issue?
73
CU3AK
Eloy
----- Fim da mensagem de Andrew Lenton <
a@...> -----
Andy Bosworth